Brugsanvisning FERM TCM1003 Fliseskæremaskine

Brugsanvisning

78 Ferm

RADIAL TILE CUTTER

THE NUMBERS IN THE FOLLOWING TEXT

CORRESPOND WITH THE PICTURES AT PAGE 2

TECNICAL SPECIFICATIONS

PRODUCT INFORMATION

Fig.4

1 Scale plate

2 Tighten knob

3 Indicater

4 Grip handle

5 Guide rall

6 Fixing bolt / mitre gauge

7 Knob / mitre gauge

8 Mitre fence

9 Blade guard

10 Back Fence ( central end with 45° cutting)

11 Back Fence (double end planed)

12 Locking knob (for stop head moving)

FUNCTIONS AND CHARACTERISTIC

Blade can tilt to any angle between 0° and 45°.

The mitre gauge on the table can turn to any angle.

In the process of cutting, the pump can provide blade

with water. This can increase the life of the blade and also

decrease dust.

Blade moves along the guide rail in straigh and keeps the

cut stable

SAFETY INSTRUCTIONS

The following symbols are used throughout this manual:

Denotes risk of personal injury, loss of life or

damage to the tool in case of non-observance of

the instructions in this manual.

Denotes risk of electric shock.

Carefully read this manual before using the machine.

Make sure that you know how the machine functions and

how to operate it. Maintain the machine in accordance

with the instructions to make sure it functions properly.

Keep this manual and the enclosed documentation with

the machine.

1. Keep work area clean.

Cluttered areas and benches invite injuries.

2. Consider work area environment.

Don’t expose power tools to rain. Don’t use power

tools in damp or wet locations. Keep work area well

lit. Don’t use power tools in presence of flammable

liquids or gases.

3. Guard against electric shock.

Prevent body contact with grounded surfaces (e.g.

pipes, radiators, ranges refrigerators).

4. Keep children away.

Do not let visitors contact tool or extension cord.

All visitors should be kept away from work area.

5. Store idle tools.

When not is use, tools should be stored in dry, high,

or locked-up place, out of reach of children.

6. Don’t force tool.

It will do the job better and safer at the rate for which

it was intended.

7. Use right tool.

Don’t force small tools or attachments to do the job

of heavy duty tool. Don’t use tools for purposes not

intended:for exam-ple, don’t use a circular saw for

cutting tree limbs or logs.

8. Dress properly.

Do not wear loose clothing or jewelry. They can be

caught in moving parts. Rubber gloves and nonskid

footwear are recommended when working

outdoors. Wear protective hair covering to contain

long hair.

9. Use safety glasses.

Also use face or dust mask if cutting operation is

dusty.

10.Don’t abuse cord.

Never carry tool by cord or yank it to disconnect it

from receptacle. Keep cord from heat, oil and sharp

edges.

11.Secure work.

Use clamps or a vise to hold work. It’s safer than

using your hand and it frees both hands to operate

tool.

12.Don’t overreach.

Keep proper footing and balance at all times.

Motor | 230 V~, 50 Hz

Power | 550 W

No load speed | 2950/ min

Blade speed | 28 m/s

Blade size | Ø 180 mm,

| Ø25.4mm Bore

Max. depth of 90° cut | 25 mm

Max. depth of 45° cut | 15 mm

Max. cutting length | 330 mm

Netto weight | 21.8 kg

Lpa (Sound pressure level) | 59.4 dB(A)

Lwa (Sound power level) | 72.4 dB(A)

Vibration | 2.8 m/s

2

Ferm 3

STAND SPARE PARTS LIST

REF. NR. DESCRIPTION Q’TY

1 TOP STIFFENER L / R SIDE 2

2 M5 NYLON NUT 12

3 M5 HEX BOLT 12

4 FRAME CLIP 4

5 FRAME BRACKET 4

6 TOP STIFFENER (FRONT / REAR) 2

7 COACH BOLT M8 16

8Ø 8 WASHER 16

9 M5 MYLON NUT 16

10 LEG NO.1 2

11 LEG 2

12 FEET PAD 4

13 BOTTOM STIFFENER L / R SIDE 2

14 BOTTOM STIFFENER (FRONT / REAR) 2

15 M6 HEX-HEAD BOLT 4

16 Ø 6 WASHER 8

17 M6 NYLON NUT 4

18 M5 NUT 2

19 RING HOOK 1

20 FRAME TUBA 1

Bedømmelse

Mere om denne brugsanvisning

Vi forstår, at det er rart at have en papirbrugsanvisning til din FERM TCM1003 Fliseskæremaskine. Du kan altid downloade brugsanvisningen fra vores hjemmeside og selv printe den. Hvis du gerne vil have en original brugsanvisning, anbefaler vi, at du kontakter FERM. De kan muligvis levere en original brugsanvisning. Leder du efter brugsanvisningen til din FERM TCM1003 Fliseskæremaskine på et andet sprog? Vælg dit foretrukne sprog på vores hjemmeside, og søg efter modelnummeret for at se, om vi har det tilgængeligt.

Specifikationer

Alle brugsanvisninger til FERM Fliseskæremaskiner
Flere brugsanvisninger til Fliseskæremaskiner

Ofte stillede spørgsmål om FERM TCM1003 Fliseskæremaskine

Vores support-team søger efter nyttige produktoplysninger og svar på ofte stillede spørgsmål. Hvis du finder urigtigheder i vores ofte stillede spørgsmål, må du meget gerne lade os det vide ved at bruge vores kontaktformular.

Relaterede produkter

Brugsanvisning

FERM TCM1001 Fliseskæremaskine

Brugsanvisning

FERM TCM1007 Fliseskæremaskine

Brugsanvisning

FERM TCM1006 Fliseskæremaskine

Brugsanvisning

FERM TCM1010 Fliseskæremaskine

Brugsanvisning

FERM TCM1002 Fliseskæremaskine

Brugsanvisning

Biltema 88-4403 Fliseskæremaskine

Brugsanvisning

Carat Caracoup Fliseskæremaskine

Brugsanvisning

Biltema 88-4404 Fliseskæremaskine

Relaterede kategorier