Brugsanvisning Crivit IAN 298596 Cykelcomputer

Brugsanvisning

GB/IE/NI

GB/IE/NI GB/IE/NI GB/IE/NI GB/IE/NI GB/IE/NI

GB/IE/NI GB/IE/NI GB/IE/NI GB/IE/NI GB/IE/NI GB/IE/NI GB/IE/NI GB/IE/NI

GB/IE/NI GB/IE/NI GB/IE/NI GB/IE/NI GB/IE/NI GB/IE/NI GB/IE/NI GB/IE/NI

GB/IE/NI GB/IE/NI GB/IE/NI GB/IE/NI GB/IE/NI GB/IE/NI GB/IE/NI GB/IE/NI

Press the SET button

20

again. Press the

MODE button

14

to activate or deactivate

individual settings (i.e.CLOCK).

Select “ON“ to add the selected function to

EASY mode. Select “OFF“ if you do not wish

to add the selected function to EASY mode.

Press the SET button

20

to confirm your entry.

Press the MODE button

14

to proceed to the

next function and repeat the steps as described

above.

Press the MODE button

14

to exit settings.

Using the backlight

Press the SET button

20

to temporarily activate

the backlight. The backlight will switch off auto-

matically after a short amount of time.

Note: In scan mode, the display switches automati-

cally between the trip distance, maximum speed,

average speed and trip time.

Note: Refer to the “Changing basic settings“ chapter

to configure the settings.

Note: To deactivate scan mode press the MODE

button

14

to return to ADVANCE mode.

CUSTOMIZE mode

Alongside ADVANCE and EASY mode, you can

also apply your own settings in CUSTOMIZE mode.

Press and hold the MODE button

14

for 3 sec-

onds and press the SET button

20

to enter the

application profile setting.

Press MODE button

14

to select EASY mode.

EASY will be flashing on display. Press and

hold the SET button

20

to enter CUSTOMIZE

mode setting.

ETA: Estimated time of arrival.

ETASTART will be displayed. Press the SET button

20

and MODE button

14

to activate the ETA

function.

Press and hold the SET button

20

for 3 seconds

to change the ETA distance and the ETA mode.

KM + / -: Kilometer counter.

Press and hold the SET button

20

for 3 seconds

and press the SET button

20

again to request

the kilometer counter settings. The LC display will

show the symbol for increasing or decreasing

the number (+ or -) and distance counter value.

TIME + / -: Timer.

Press and hold the SET button

20

for 3 seconds

to change the timer settings. The LC display will

show the symbol for increasing or decreasing

the number (+ or -) and timer counter value.

SCAN: Scan

STPWATCH: Stopwatch.

Press the SET button

20

to start the stopwatch.

Press the SET button

20

again to stop the stop-

watch. Press and hold the SET button

20

for

3 seconds to set the stopwatch to 0.

CAL RATE: Current calorie consumption.

CALORIE: Calorie counter.

Press and hold the SET button

20

for 3 seconds

to set the calorie counter to 0.

FAT-BURN: Fat-burning in grams.

Press and hold the SET button

20

for 3 seconds

to set the fat-burning value to 0.

CO2 KG: CO2 saved.

Press and hold the SET button

20

for 3 seconds

and press the SET button

20

again to request

the reference value for CO2 setting.

FUELSAVE: Fuel save comparison with a car.

Press and hold the SET button

20

for 3 seconds

and press the SET button

20

again to request

th

e fuel unit and fuel consumption setting.

MAXSPEED: Maximum speed.

Press and hold the SET button

20

for 3 seconds

to set the maximum speed to 0.

AVGSPEED: Average speed.

Press and hold the SET button

20

for 3 seconds

to set the average speed to 0.

TRIPTIME: Trip time.

TEMP: Thermometer.

Press the SET button

20

to display the maximum

temperature value reached (HI). Press the SET

button

20

again to display the lowest tempera-

ture value reached (LO). Press the SET button

20

and keep it pressed while the highest or lowest

temperature is displayed to return to the current

temperature and delete the saved information.

Press and hold the SET button

20

for 3 seconds

and press the SET button

20

again to request

temperature unit setting.

CLOCK: Displays the time.

Press and hold the SET button

20

for 3 seconds

and press the SET button

20

again to request

the time and date settings.

Note: Press SET button

20

to can be switch

display of the time / date.

TOTALODO: Total mileage counter.

Press and hold the SET button

20

for 3 seconds

and press the SET button

20

again to change

the tyre size, ODO and maintenance interval

settings.

TOTAL-TM: Total trip time.

Press and hold the SET button

20

for 3 seconds

and press the SET button

20

again to change

the saved total trip time.

TRIPDIST: Trip distance.

Press and hold the SET button

20

for 3 seconds

to set the trip distance, maximum speed, aver-

age speed and trip time to 0.

The bicycle computer features the

following functions:

ADVANCE mode: By pressing the MODE button

14

you can select the following function displays:

CLOCK > TOTALODO > TOTAL-TM > TRIPDIST >

MAXSPEED > AVGSPEED > TRIPTIME > TEMP >

STPWATCH > CAL RATE > CALORIE > FAT-BURN

> CO2 KG >FUELSAVE > ETA > KM+ / - >

TIME+ / - > SCAN

EASY mode:

By pressing the MODE button

14

you can select

the following function displays:

TRIPDIST > MAXSPEED > AVGSPEED > TRIPTIME

Note: You can also apply your own settings to

turn on the remaining function displays. See

“CUSTOMIZE mode” chapter.

“Troubleshooting“ and reset all basic settings.

You will then have to reestablish the connection

between the bicycle computer

8

and the sen-

sor

6

.

Using the bicycle computer

Note: The bicycle computer will automatically

switch to standby mode when it has not been used

for over 5 minutes. Pressing any button or vibrations

will reactivate the computer. The function indicator

will show the current mode

Press the MODE button

14

repeatedly to scroll

through the different functions

. Press and hold

the S

ET button

20

to request or reset the saved

values.

– Fuel cons: 3 digit number can be input in unit of

L / 100 KM (LITER) or mpg (GALLON) per select.

– Unit of temperature: °C or °F can be select.

Confirm your choice using the SET button

20

.

Press the MODE button

14

to exit settings. You

have now successfully configured the basic

settings.

If you wish to change the basic settings, please

follow the steps outlined in the chapter “Reset-

ting the bicycle computer“ and reset all basic

settings.

Connecting the bicycle

computer to the sensor

Use the magnet

1

to trigger the sensor

6

, the

speed tendency

19

shows a curve to confirm

successful connection. The bicycle computer

8

is now ready to use. If the connection breaks,

please follow the steps in the chapter

– Time: hour and min can be input.

– Date format: DD-MM-YY or MM-DD-YY can

be select.

– Date: Year, month and day can be input.

– CO2 emission rate: 3 digit number can be input

in unit of G / KM.

– Maintenance interval: 3 digit number can be input

in unit of KM or MILE per select.

Note: If the maintenance interval input “000” will

switch off the service indicator.

– Back light ON / OFF: Switch ON or OFF the

back light function. When switch ON, you can

input the LIGHT ON and LIGHT OFF time. The

back light can be activated during the input time.

– ETA distance: 5 digit number can be input in unit

of KM or MILE per select.

– ETA mode: CLOCK or TIME for select.

– Fuel format: LITER or GALLON can be select.

Important functions:

MODE button

14

to configure values / SET button

20

to edit and adopt settings

– Language: 6 language can be select.

– Application profile: ADVANCE or EASY can

be select.

– Tyre size: Enter the circumference for your tyres

size in mm, 4 digit number can be input.

Note: You can calculate your tyre circumference

(U) by multiplying the tyre diameter (D) by 3.1416

(Fig. L). The list (Fig. M) features the tyre circumfer-

ences (U) of conventional tyre diameters (D).

– Unit of length: KM / KMH or MILE / MPH can

be select.

– Age: 2 digit number can be input.

– Unit of weight: KG or LB can be select.

– Weight: 3 digit number can be input in unit of

KG or LB per select.

– Time format: 12 or 24hrs can be select.

Attaching the bicycle computer

To attach the product, proceed as depicted in

Fig. B to I.

Trim the protruding ends of the cable ties

2

using a suitable tool such as a side cutter.

Note: Ensure that the bicycle computer

8

is

attached less than 70 cm from the sensor

6

.

Attach the bicycle computer

8

to the sensor

6

within a 30 ° angle, see Fig. B.

Initial use

Changing basic settings

Basic settings: Language > Application profile >

Tyre size > Unit of length > Age > Unit of weight >

Weight > Time format > Time > Date format > Date

>

CO2 emission rate >Maintenance interval >Back

light ON /

OFF > ETA distance > ETA mode > Fuel

format > Fuel cons > Unit of temperature

Before use

Remove the protective film from the LC display

13

before you use the device for the first time.

Note: Do not use this product on electric bikes.

The motor could cause the product to malfunction.

Inserting the battery

To insert the battery

3

proceed as depicted

in Fig. A.

Use a coin to open the battery compartment.

Use this to turn the battery cap counter-clock-

wise. Ensure that you insert the battery correctly

into the battery compartment (polarity). This is

shown in the battery compartment. Ensure that

the O-ring is attached correctly before inserting

the battery.

Turn the battery cap clockwise onto the battery

compartment using the coin to close it.

rechargeable battery

and the product.

Clean the contacts on

the battery / rechargea-

ble battery and in the

battery compartment

before inserting!

Remove exhausted

batteries / rechargeable

batteries from the product

immediately.

the product will not be

used for a longer period.

Risk of damage of

the product

Only use the specified

type of battery /

rechargeable battery!

Insert batteries / rechar-

geable batteries accord-

ing to polarity marks (+)

and (-) on the battery /

In the event of a leakage

of batteries / rechargeab

le

batteries, immediately

remove them from the prod-

uct to prevent damage.

Only use the same type

of batteries / rechargea-

ble batteries. Do not mix

used and new batteries /

rechargeable batteries.

Remove batteries /

rechargeable batteries if

and seek immediate

medical attention.

WEAR PROTEC-

TIVE GLOVES!

Leaked or damaged bat-

teries / rechargeable bat-

teries can cause burns

on contact with the skin.

Wear suitable protective

gloves at all times if such

an event occurs.

t

emperatures, which could

affect batteries / rech

arge-

able batteries, e.g. radi-

ators / direct sunlight.

Avoid contact with the

skin, eyes and mucous

membranes. In the event

of contact with battery

acid, thoroughly flush

the affected area with

plenty of clean water

Never throw batteries /

rechargeable batteries

into fire or water.

Do not exert mechanical

loads to batteries /

rechargeable batteries.

Risk of leakage of

batteries / rechargeable

batteries

Avoid extreme environ-

mental conditions and

DANGER OF

EXPLOSION!

Never recharge non-re-

chargeable batteries.

Do not short-circuit bat-

teries / rechargeable

batteries and / or open

them. Overheating, fire or

bursting can be the result.

Safety

instructions for

batteries /

rechargeable

batteries

DANGER TO LIFE!

Keep batteries / recharge-

able batteries out of reach

of children. If accidentally

swallowed seek immedi-

ate medical attention.

Please note that the guar-

antee does not cover

damages caused by incor-

rect handling, non-com-

pliance with the safety

instructions or use by

unauthorised persons.

lacking experience and

knowledge, when super-

vised or instructed in the

safe use of the product

and understand the asso-

ciated risks. Do not allow

children to play with the

product. Cleaning and

user maintenance must

not be performed by chil-

dren without supervision.

General safety

instructions

KEEP ALL SAFETY NOTICES

AND INSTRUCTIONS FOR

FUTURE REFERENCE!

This product may be used

by children 8 years and

up as well as persons

with physical, sensory or

mental impairments or

Frequency Band: 125 KHz +/-10 KHz

Max. Transmitted power: 125 KHz <6.58 dBm

Scope of delivery

1 Wireless bike

computer

1 Bracket for bicycle

computer

1 Damper for bicycle

computer bracket

1 Bracket with sensor

1 Magnet

6 Cable ties

2 Batteries, 3 V

(direct current),

Model CR2032

button cell battery

2 Replacement O-rings

for bicycle computer

and sensor

1 Instructions for use

15

Speed comparator display:

Compares the current speed with the

average speed

▲ higher than the average speed

▼ lower than the average speed

16

SCAN display

17

Maintenance interval display

18

Battery state indicator (for bicycle computer)

19

Speed tendency:

This displays the trend in terms of whether

the speed is increasing (large bar, right) or

decreasing (small bar, left).

20

SET button (S)

Technical data

Battery: 3 V (direct current)

(CR2032 button cell

battery)

Operating temperature: 0–50 °C

- ETA (Estimated time of arrival)-Distance

- ETA time

- Fuel Saving

- Back light ON / OFF

Parts Description

1

Magnet

2

Cable ties

3

Battery

4

Damper for bicycle computer bracket

5

Bracket

6

Sensor

7

Bicycle computer battery cap

8

Bicycle computer

9

Sensor battery cap

10

Primary functional value display

11

Function indicator

12

Secondary functional value display

13

LC display

14

MODE button (M)

Functions

– Menu languages: GB, DE, FR, NL, IT, ES

– Clock

– Stopwatch

– Temperature display °C / °F

– Memory function for min. and max. temperature

– Bike speed display (0–99.9 km / h)

– Average speed display (0–99.9 km / h)

– Maximum speed display (0–99.9 km / h)

– Speed comparator

– Speed trend

– Trip timer (max. 9:59:59) (Countdown or

forward-counting)

– Odometer (Countdown or forward-counting)

– Total kilometer and total trip time display

– Calorie counter

– Fat burning display

– CO2 saved

– Scan display (functions are interconnected)

– Automatic start function

Bike Computer

Introduction

We congratulate you on the purchase of your new

product. You have chosen a high quality product.

The instructions for use are part of the product. They

contain important information concerning safety,

use and disposal. Before using the product, please

familiarise yourself with all of the safety information

and instructions for use. Only use the product as

described and for the specified applications. If you

pass the product on to anyone else, please ensure

that you also pass on all the documentation with it.

Intended use

The product is intended to be used as a bicycle

computer. Not for commercial use.

BIKE COMPUTER

IAN 298596

1

G

F

E

D

B

I

H

J

10

11

14

15

16

17

18

19

5

3

4

6

C

1

2

8

1

6

5 2

4

2

6

6

2

1

1 6

max.

2 mm

6

1

20

12

13

A

7

3

8

6

3

9

max. 30°

max. 70 cm

D

U

L

M

D U

20

1598 mm

22

1759 mm

24

1916 mm

26

(650 A) 2073 mm

26,5

(Tubular) 2117 mm

26,6

(700 x 25C) 2124 mm

26,8

(700 x 28C) 2136 mm

27

(700 x 32C) 2155 mm

28

(700B) 2237 mm

ATB24

x 1,75 1888 mm

ATB26 x1,4 1995 mm

ATB26 x1,5 2030 mm

ATB26 x1,75 2045 mm

ATB26 x 2 (650B) 2099 mm

27

x 1 2138 mm

27

x 1 1 / 4 2155 mm

K

8

5

FAHRRADCOMPUTER

Bedienungs- und Sicherheitshinweise

BIKE COMPUTER

Operation and Safety Notes

CYKELCOMPUTER

Brugs- og sikkerhedsanvisninger

Bedømmelse

Mere om denne brugsanvisning

Vi forstår, at det er rart at have en papirbrugsanvisning til din Crivit IAN 298596 Cykelcomputer. Du kan altid downloade brugsanvisningen fra vores hjemmeside og selv printe den. Hvis du gerne vil have en original brugsanvisning, anbefaler vi, at du kontakter Crivit. De kan muligvis levere en original brugsanvisning. Leder du efter brugsanvisningen til din Crivit IAN 298596 Cykelcomputer på et andet sprog? Vælg dit foretrukne sprog på vores hjemmeside, og søg efter modelnummeret for at se, om vi har det tilgængeligt.

Specifikationer

Alle brugsanvisninger til Crivit Cykelcomputere
Flere brugsanvisninger til Cykelcomputere

Ofte stillede spørgsmål om Crivit IAN 298596 Cykelcomputer

Vores support-team søger efter nyttige produktoplysninger og svar på ofte stillede spørgsmål. Hvis du finder urigtigheder i vores ofte stillede spørgsmål, må du meget gerne lade os det vide ved at bruge vores kontaktformular.

Relaterede produkter

Brugsanvisning

Crivit IAN 278500 Cykelcomputer

Brugsanvisning

Crivit IAN 109642 Cykelcomputer

Brugsanvisning

Crivit IAN 79107 Cykelcomputer

Brugsanvisning

Crivit IAN 270550 Cykelcomputer

Brugsanvisning

Crivit IAN 423961 Cykelcomputer

Brugsanvisning

Crivit IAN 315393 Cykelcomputer

Brugsanvisning

Crivit IAN 307553 Cykelcomputer

Brugsanvisning

Crivit IAN 87309 Cykelcomputer

Relaterede kategorier