Brugsanvisning Alpina SF 4003 Frituregryde

Brugsanvisning

2

ENGLISH

Dear Customer,

Thank you for choosing this ALPINA home appliance. Your Alpina appliance comes with a 2 year warranty and will provide years of

service if looked after properly. The ALPINA name brings you Quality, Reliability and Dependability. We hope you will continue to

make ALPINA your first choice in home appliances

.

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should be followed:

1. Read all instructions carefully.

2. Make sure the power supply corresponds to one on the rating label.

3. To avoid electrical shock, do not immerse electrical parts in water or other liquid.

4. Do not allow children to operate or play with the appliance.

5. Unplug from outlet when not in use, or before putting on/taking off parts.

6. Do not use with damaged electrical cord or plug.

7. If damaged or malfunction occurs, refer to an authorized service center only.

8. Do not place on or near hot surfaces.

9. Never pull the appliance by the power cord.

10. Do not use the appliance for other than intended household use.

HOW TO OPERATE

Before first use:

The Basket and the Oil Tank should be cleaned before first use: Take the basket from inside the oil tank and lift the electrical unit out

vertically. Wash the oil tank and the basket with detergent and water. Rinse and dry them.

Warning: Never wet the electrical unit.

Refit all the components.

Fill the oil tank with oil or liquid fat to levels between the minimum and maximum level marks on the inside wall of the oil

tank.

Using fresh solid frying fat:

1. Melt the fat in a saucepan over a low heat.

2. Warning: Supervise at all times and keep out of the reach of children.

3. Switch power off as soon as the fat is melted. Place the deep-fryer in the sink and carefully pour the melted fat into the oil tank.

4. Carefully carry the deep-fryer to the place where it is to be used.

Using solid fat which has hardened in the fryer:

1. Make holes in the fat first. Warning: Take care not to damage the element.

2. Close the fryer cover to prevent spitting and set the temperature control to 160°C. The temperature can be further increased

once the fat has melted. Warning: Do not use other melting procedures.

3. Place the basket handle vertically and press the two buttons at the same time to fit it into the basket openings, pressing it

down until correctly in position.

4. Plug in and turn the temperature control to the required setting, depending on the food to be fried.

5. Close the lid, turn on the Power ON/OFF switch and heat-up the oil/fat. The ON/OFF switch light and temperature control light

will come on. When the oil/fat has reached the temperature selected, the temperature control light goes out. It will continue

to come on and go off according to the thermostat cycles, during the whole frying time.

6. With the basket outside the deep-fryer, add the food to be fried. Warning: Do not fill to more than three-quarters.

7. Open the lid, place the basket gently into the oil by hooking the basket at the lower position, and ensure that the

oil/fat have reached to the required temperature.

Warning: 1). Ensure the food is covered by oil.

2). Keep the lid open during frying to avoid overflowing and over frying.

8. When food is placed in the appliance, this will cool the oil and the temperature control light will turn on.

9. Once the food is fried, lift the basket and hook the basket at the upper position to drain the oil thoroughly.

10. Take the basket off the deep-fryer and turn out the food.

11. When not in use, set the ON/OFF switch to OFF. Even though the switch is turned off, the power supply will be disconnected

only when the appliance is unpluged. It is highly recommended to unplug the appliance after finish using.

Warning:

This appliance is equipped with a grounded, Type G, 3-pin power supply cord. This is a safety feature. Do not attempt to defeat the

safety purpose of this plug.

MAINTENANCE AND CLEANING

1. Before cleaning the appliance, unplug it and wait for it to cool down completely.

2. Remove the electrical unit.

3. Warning: Never submerge the electrical unit into water or wash it under the tap. Clean it with a damp-dry cloth.

Bedømmelse

Mere om denne brugsanvisning

Vi forstår, at det er rart at have en papirbrugsanvisning til din Alpina SF 4003 Frituregryde. Du kan altid downloade brugsanvisningen fra vores hjemmeside og selv printe den. Hvis du gerne vil have en original brugsanvisning, anbefaler vi, at du kontakter Alpina. De kan muligvis levere en original brugsanvisning. Leder du efter brugsanvisningen til din Alpina SF 4003 Frituregryde på et andet sprog? Vælg dit foretrukne sprog på vores hjemmeside, og søg efter modelnummeret for at se, om vi har det tilgængeligt.

Specifikationer

Alle brugsanvisninger til Alpina Frituregryder
Flere brugsanvisninger til Frituregryder

Ofte stillede spørgsmål om Alpina SF 4003 Frituregryde

Vores support-team søger efter nyttige produktoplysninger og svar på ofte stillede spørgsmål. Hvis du finder urigtigheder i vores ofte stillede spørgsmål, må du meget gerne lade os det vide ved at bruge vores kontaktformular.

Relaterede produkter

Brugsanvisning

Alpina SF 4001 Frituregryde

Brugsanvisning

Alpina SF 4006 Frituregryde

Brugsanvisning

Alpina SF 4008 Frituregryde

Brugsanvisning

Alpina SF 4007 Frituregryde

Brugsanvisning

Philips HD9653 Frituregryde

Brugsanvisning

Tefal EY111810 Air Fry Ultra Frituregryde

Brugsanvisning

Tefal EY501866 Easy Fry Frituregryde

Brugsanvisning

Philips HD9622 Frituregryde

Relaterede kategorier