Brugsanvisning Zanussi ZHP60260SA Emhætte

Brugsanvisning

2

SAFETY WARNING

▪ The minimum distance between the hob surface on which the pans stand

and the lower part of the hood must be 65 cm, unless otherwise specifi ed

in the installation instructions. If the hob installation instructions specify a

greater distance, it must be taken into account.

▪ The air collected must not be conveyed into a duct used to blow off

smokes from appliances fed with an energy other than electricity (central

heating systems, thermosiphons, water-heaters, etc.).

▪ Comply with the offi cial instructions provided by the competent autho-

rities in merit when installing the disposal duct. In addition, exhaust air

should not be discharged into a wall cavity, unless the cavity is designed

for that purpose.

▪ The room must be well aerated in case a hood and some other heat

equipment fed with an energy other than electricity (gas, oil, coal heaters,

etc) operate at the same time.

▪ In fact the intake hood, disposing of air, could create a vacuum in the

room. The vacuum should not exceed 0,04mbar. This prevents the gas

exhausted by the heat source from being intaken again. It is therefore

advisable to ensure the room contains air taps able to ensure a steady

fl ow of fresh air.

▪ Check the data label inside the appliance; if the symbol (

) is printed,

read the following: this appliance has such technical particulars that it

belongs to class II insulation, therefore it must not be earthed.

▪ Check the data label inside the appliance; if the symbol ( ) is NOT prin-

ted, read the following: ATTENTION: This appliance must be earthed.

When making the electrical connections, check that the current socket

has a ground connection.

▪ When making the electrical connections, check that the voltage values

correspond to those indicated on the data plate inside the appliance

itself. In case your appliance is not fi tted with a supply cord and a plug or

with other means for disconnection from the supply mains having a con-

tact separation in all poles that provide full disconnection under overvol-

tage category III conditions, that means for disconnection must be incor-

porated in the fi xed wiring in accordance with the wiring rules. If your unit

features a power lead and plug, position this so the plug is accessible.

▪ Always switch off the electricity supply before carrying out any cleaning

Bedømmelse

Mere om denne brugsanvisning

Vi forstår, at det er rart at have en papirbrugsanvisning til din Zanussi ZHP60260SA Emhætte. Du kan altid downloade brugsanvisningen fra vores hjemmeside og selv printe den. Hvis du gerne vil have en original brugsanvisning, anbefaler vi, at du kontakter Zanussi. De kan muligvis levere en original brugsanvisning. Leder du efter brugsanvisningen til din Zanussi ZHP60260SA Emhætte på et andet sprog? Vælg dit foretrukne sprog på vores hjemmeside, og søg efter modelnummeret for at se, om vi har det tilgængeligt.

Specifikationer

Alle brugsanvisninger til Zanussi Emhætter
Flere brugsanvisninger til Emhætter

Ofte stillede spørgsmål om Zanussi ZHP60260SA Emhætte

Vores support-team søger efter nyttige produktoplysninger og svar på ofte stillede spørgsmål. Hvis du finder urigtigheder i vores ofte stillede spørgsmål, må du meget gerne lade os det vide ved at bruge vores kontaktformular.

Relaterede produkter

Brugsanvisning

Zanussi ZHC9244X Emhætte

Brugsanvisning

Zanussi ZFV819K Emhætte

Brugsanvisning

Zanussi ZHC6235X Emhætte

Brugsanvisning

Zanussi ZFP416X Emhætte

Brugsanvisning

Zanussi ZHT621W Emhætte

Brugsanvisning

Zanussi ZHG51251G Emhætte

Brugsanvisning

Zanussi ZHT630B Emhætte

Brugsanvisning

Zanussi ZHP92370XA Emhætte

Relaterede kategorier