Brugsanvisning Ryobi RLM46160S Plæneklipper

Brugsanvisning

English

2

■ Keep work area clean. Cluttered or dark areas invite

accidents.

LAWN MOWER SAFETY WARNINGS

■ Before use, always visually inspect to ensure blades,

blade bolts, and cutter assembly are not worn or

damaged.

■ Replace worn or damaged blades and bolts in sets to

preserve balance.

■ Never operate the mower if the operator presence

control, when released, does not stop the engine.

■ Do not operate the product without the entire grass

catcher or the guard of the self-closing discharge

opening in place.

■ The blade on the product is sharp. Use extreme caution

and wear heavy-duty gloves when fitting, replacing,

cleaning or checking bolt security.

■ Bring the product to an authorised service centre to

replace damaged or unreadable labels.

■ Check all nuts, bolts, and screws at frequent intervals

for proper tightness to be sure that the product is in safe

working condition.

■ Check the grass catcher frequently for wear, holes,

or deterioration. This can cause objects to be thrown

towards the operator.

■ Replace worn or damaged parts before operating the

product.

■ Turn on the engine carefully with the user behind the

handlebars in the operator safety zone. Never start the

product if:

● all four wheels are not on the ground

● the grass discharge chute is exposed and is not

protected by the grass box and grass discharge

chute cover

● hands and feet of all persons are not clear of the

cutting enclosure

■ Do not force the product. It will do the job better and

safer at the speed for which it was designed.

■ Do not overload the product. Mowing long, thick grass

may cause the engine speed to drop or the power to cut

out. When mowing in long thick grass, set a high cutting

height on your first cut to help reduce the load.

■ Stop the blade when crossing gravel surfaces.

■ Do not pull back the product unless absolutely

necessary. If you must back the product away from a

wall or obstruction, first look down and behind to avoid

tripping or pulling the product over your feet.

■ Stop the engine and allow the blade to stop if the

product has to be tilted for transportation when crossing

surfaces other than grass, and when transporting the

product to and from the area to be mowed.

■ Never use the product with defective guards or shields,

or without safety devices, such as deflectors and/ or

grass catchers, in place.

■ Do not tilt the product when starting the engine or while

the engine is running. This exposes the blade and

increases the probability of objects being thrown.

■ Start the engine carefully according to instructions and

keep hands and feet away from cutting area. Do not

put hands or feet near or under rotating parts. Keep

clear of the discharge opening at all times. Do not start

the product when standing in front of the discharge

opening.

■ Never pick up or carry the product while it is running.

■ When not in use, store the product in a well-ventilated,

dry, or locked-up place that is out of the reach of

children.

■ Follow the manufacturer’s instructions for proper

operation and installation of accessories. Only use

accessories approved by the manufacturer.

■ Do not operate the engine in a confined space where

dangerous carbon monoxide fumes can collect.

■ Do not change the engine governor settings or over-

speed the engine.

■ Stop the product and wait until the blade comes to a

complete stop. Allow the product to cool down, then

disconnect the spark plug wire:

● whenever you leave the product unattended

(including disposal of grass clippings).

● before cleaning a blockage or unclogging discharge

chute

● before checking, cleaning, or working on the

product

● before removing the grass catcher or opening the

grass discharge chute cover

● before refuelling

■ If the product starts to vibrate abnormally, check

immediately to:

● inspect for damage, particularly the blades

● replace or repair any damaged parts

● check for and tighten any loose parts

■ If the product strikes a foreign object, follow these

steps:

● Stop the product and disconnect the spark plug

wire.

● Thoroughly inspect the mower and grass catcher

for any damage.

● Repair any damage before restarting and continuing

to operate the mower

■ Avoid holes, ruts, bumps, rocks, property stakes, or

other hidden objects. Uneven terrain could cause a

slip-and-fall accident.

■ Allow engine to cool down before storing in any

enclosure.

■ To reduce the risk of fire, keep the engine, silencer, and

petrol storage area free of grass, leaves, and excessive

grease.

■ If the fuel tank has to be drained, this should be done

outdoors.

■ Disconnect the spark plug wire before making any

Bedømmelse

Mere om denne brugsanvisning

Vi forstår, at det er rart at have en papirbrugsanvisning til din Ryobi RLM46160S Plæneklipper. Du kan altid downloade brugsanvisningen fra vores hjemmeside og selv printe den. Hvis du gerne vil have en original brugsanvisning, anbefaler vi, at du kontakter Ryobi. De kan muligvis levere en original brugsanvisning. Leder du efter brugsanvisningen til din Ryobi RLM46160S Plæneklipper på et andet sprog? Vælg dit foretrukne sprog på vores hjemmeside, og søg efter modelnummeret for at se, om vi har det tilgængeligt.

Specifikationer

Alle brugsanvisninger til Ryobi Plæneklippere
Flere brugsanvisninger til Plæneklippere

Ofte stillede spørgsmål om Ryobi RLM46160S Plæneklipper

Vores support-team søger efter nyttige produktoplysninger og svar på ofte stillede spørgsmål. Hvis du finder urigtigheder i vores ofte stillede spørgsmål, må du meget gerne lade os det vide ved at bruge vores kontaktformular.

Relaterede produkter

Brugsanvisning

Ryobi RY48RM76A Plæneklipper

Brugsanvisning

Ryobi RY18LMX37A Plæneklipper

Brugsanvisning

Ryobi RLM36X46L5F Plæneklipper

Brugsanvisning

Ryobi RLM1956MEB Plæneklipper

Brugsanvisning

Ryobi RLM18C32S25S Plæneklipper

Brugsanvisning

Ryobi RLM3313 Plæneklipper

Brugsanvisning

Ryobi RY18LMX40A Plæneklipper

Brugsanvisning

Ryobi RLM13E33S Plæneklipper

Relaterede kategorier