Brugsanvisning Makita DSP601 Rundsav

Brugsanvisning

11 ENGLISH

Guard function

1. Check the guard for proper closing before

each use. Do not operate the saw if the guard

does not move freely and enclose the blade

instantly. Never clamp or tie the guard so that

the blade is exposed.Ifthesawisaccidentally

dropped, the guard may be bent. Check to make

surethattheguardmovesfreelyanddoesnot

touch the blade or any other part, in all angles and

depthsofcut.

2. Check the operation and condition of the

guard return spring. If the guard and the spring

are not operating properly, they must be ser-

viced before use.Theguardmayoperateslug-

gishly due to damaged parts, gummy deposits, or

abuild-upofdebris.

3. Assure that the base plate of the saw will not

shift while performing a “plunge cut”. Blade

shiftingsidewayswillcausebindingandlikelykick

back.

4. Always observe that the guard is covering the

blade before placing the saw down on bench

or oor.Anunprotected,coastingbladewillcause

the saw to walk backwards, cutting whatever is in

itspath.Beawareofthetimeittakesfortheblade

tostopaftertheswitchisreleased.

Additional safety warnings

1. Use extra caution when cutting damp wood,

pressure treated lumber, or wood containing

knots.Maintainsmoothadvancementoftoolwith-

out decrease in blade speed to avoid overheating

thebladetipsandifcuttingplastics,toavoidmelt-

ing the plastic.

2. Do not attempt to remove cut material when

blade is moving. Wait until blade stops before

grasping cut material.Bladescoastafterturnoff.

3. Avoid cutting nails. Inspect for and remove all

nails from lumber before cutting.

4. Place the wider portion of the saw base on

that part of the workpiece which is solidly

supported, not on the section that will fall off

when the cut is made. If the workpiece is short

or small, clamp it down. DO NOT TRY TO HOLD

SHORT PIECES BY HAND!

►Fig.5

5. Before setting the tool down after completing a

cut, be sure that the guard has closed and the

blade has come to a complete stop.

6. Never attempt to saw with the circular saw

held upside down in a vise. This is extremely

dangerous and can lead to serious accidents.

►Fig.6

7. Some material contains chemicals which may

be toxic. Take caution to prevent dust inhala-

tion and skin contact. Follow material supplier

safety data.

8. Do not stop the blades by lateral pressure on

the saw blade.

9. Do not use any abrasive wheels.

10. Only use the saw blade with the diameter that

is marked on the tool or specied in the man-

ual.Useofanincorrectlysizedblademayaffect

theproperguardingofthebladeorguardopera-

tionwhichcouldresultinseriouspersonalinjury.

11. Keep blade sharp and clean. Gum and wood

pitch hardened on blades slows saw and

increasespotentialforkickback.Keepbladeclean

byrstremovingitfromtool,thencleaningitwith

gum and pitch remover, hot water or kerosene.

Never use gasoline.

12. Wear a dust mask and hearing protection when

use the tool.

13. Always use the saw blade intended for cutting

the material that you are going to cut.

14. Only use the saw blades that are marked with

a speed equal or higher than the speed marked

on the tool.

15. (For European countries only)

Always use the blade which conforms to

EN847-1.

SAVE THESE INSTRUCTIONS.

WARNING: DO NOT let comfort or familiarity

with product (gained from repeated use) replace

strict adherence to safety rules for the subject

product. MISUSE or failure to follow the safety

rules stated in this instruction manual may cause

serious personal injury.

Important safety instructions for

battery cartridge

1. Before using battery cartridge, read all instruc-

tions and cautionary markings on (1) battery

charger, (2) battery, and (3) product using

battery.

2. Do not disassemble battery cartridge.

3. If operating time has become excessively

shorter, stop operating immediately. It may

result in a risk of overheating, possible burns

and even an explosion.

4. If electrolyte gets into your eyes, rinse them

out with clear water and seek medical atten-

tion right away. It may result in loss of your

eyesight.

5. Do not short the battery cartridge:

(1) Do not touch the terminals with any con-

ductive material.

(2) Avoid storing battery cartridge in a con-

tainer with other metal objects such as

nails, coins, etc.

(3) Do not expose battery cartridge to water

or rain.

A battery short can cause a large current

ow, overheating, possible burns and even a

breakdown.

6. Do not store the tool and battery cartridge in

locations where the temperature may reach or

exceed 50 °C (122 °F).

7. Do not incinerate the battery cartridge even if

it is severely damaged or is completely worn

out. The battery cartridge can explode in a re.

8. Be careful not to drop or strike battery.

9. Do not use a damaged battery.

Bedømmelse

Mere om denne brugsanvisning

Vi forstår, at det er rart at have en papirbrugsanvisning til din Makita DSP601 Rundsav. Du kan altid downloade brugsanvisningen fra vores hjemmeside og selv printe den. Hvis du gerne vil have en original brugsanvisning, anbefaler vi, at du kontakter Makita. De kan muligvis levere en original brugsanvisning. Leder du efter brugsanvisningen til din Makita DSP601 Rundsav på et andet sprog? Vælg dit foretrukne sprog på vores hjemmeside, og søg efter modelnummeret for at se, om vi har det tilgængeligt.

Specifikationer

Alle brugsanvisninger til Makita Rundsave
Flere brugsanvisninger til Rundsave

Ofte stillede spørgsmål om Makita DSP601 Rundsav

Vores support-team søger efter nyttige produktoplysninger og svar på ofte stillede spørgsmål. Hvis du finder urigtigheder i vores ofte stillede spørgsmål, må du meget gerne lade os det vide ved at bruge vores kontaktformular.

Relaterede produkter

Brugsanvisning

Makita LS1016L Rundsav

Brugsanvisning

Makita BCS550ZX Rundsav

Brugsanvisning

Makita CC301D Rundsav

Brugsanvisning

Makita 4105KB Rundsav

Brugsanvisning

Makita 4114S Rundsav

Brugsanvisning

Makita EK7650H Rundsav

Brugsanvisning

Makita BSS500RFX Rundsav

Brugsanvisning

Makita DSS610 Rundsav

Relaterede kategorier