Brugsanvisning Hoover SSNB1700 011 Damprenser

Brugsanvisning

2

IMPORTANT: ALWAYS ENSURE THE CLEANER HAS FULLY COOLED DOWN BEFORE

PERFORMING ANY MAINTENANCE TASKS.

Empty the water tank

1. Unplug the cleaner from the main power and ensure the unit has cooled.

2. Remove the clean water tank for the main body of the cleaner. [5]

3. Twist the cap anti-clockwise and remove. [6]

4. Empty any excess water from the tank. [16] Replace the cap and return to the cleaner.

Removing and cleaning the textile pad

1. Unplug the cleaner from the main power and ensure the unit has cooled.

2. If necessary remove the carpet glider, then peel the textile pad from the oor base. [17]

3.

Wash the textile pad in a washing machine with a mild detergent at max temperature 40°C.

IMPORTANT: Do not use bleach or fabric softener when washing the textile pad.

Replacing the hard water lter

The cleaner is tted with a hard water lter. If you live in an area of hard water the lter will

discolour over time. Depending on the water hardness and frequency of use the lter should

be changed every 6 months.

1. Unplug the cleaner from the main power and ensure the unit has cooled.

2. Remove the clean water tank for the main body of the cleaner. [5]

3. Lift the hard water lter out of the cleaner. [18] Replace with new lter.

4. Reassemble the clean water tank to your cleaner.

NOTE: The condition of the lter will aect the cleaner performance.

Cleaning the blockage

1. Turn o the appliance and remove from electrical supply.

Wait for appliance to fully cool down before continuing any maintenance. [19]

2. Ensure the water tank is empty.

3. Detach oor nozzle from cleaner body. [20]

4. Insert supplied de-scaling tool into steam outlet to clear any blockages. [21]

5. Re-assemble oor nozzle to the appliance body.

GB

Steam cleaning hard oors

NOTE: Always sweep or vacuum the oor prior to use to remove any loose dirt

or debris.

IMPORTANT: Do not use the cleaner without a textile pad attached to the floor head.

NOTE: Do not use the carpet glider when cleaning hard oors.

1. Plug the steam cleaner into the main power. The blue ON light will illuminate.

2. After a few seconds the green Steam Ready light will illuminate indicating the cleaner is

ready for use.

3. Recline the cleaner by placing a foot on the oor head and lowering the main body

towards the oor. [9]

4. To produce steam press the Steam Trigger Button. [10]

5. Move the cleaner slowly backwards and forwards paying particular attention to high

trac areas. [11]

Steam cleaning hard oor - intensive clean

Use the triangular oor brush on hard oors that require deep cleaning. Please note that there

is no mop to allow the steam to be aimed directly at the surface to clean more intensely. The

area will have to be mopped separately.

NOTE: Always sweep or vacuum the floor prior to use to remove any loose dirt or

debris.

1. Remove the oor brush from the oor head by pressing the release pedal at the rear. Lift

the cleaner with oor brush attached out of the oor head. [12]

2. Plug the steam cleaner into the main power. The blue ON light will illuminate. After a

few seconds the green Steam Ready light will illuminate indicating the cleaner is ready

for use.

3. Recline the cleaner by placing a foot on the oor brush and lowering the main body

towards the oor. [13]

4. To produce steam press the Steam Trigger Button. [10]

5. Move the cleaner slowly backwards and forwards paying particular attention to high

trac areas. [14]

Refreshing carpets

NOTE: Always sweep or vacuum the floor prior to use to remove any loose dirt or

debris.

IMPORTANT: Do not use the cleaner without a textile pad attached to the oor head.

1. Attach the carpet glider to the oor head. [15]

2. Plug the steam cleaner into the main power. The blue ON light will illuminate.

3. After a few seconds the green Steam Ready light will illuminate indicating the cleaner is

ready for use.

4. Recline the cleaner by placing a foot on the oor head and lowering the main body

towards the oor. [9]

5. To produce steam press the Steam Trigger Button. [10]

CLEANER MAINTENANCE

6. Move the cleaner slowly backwards and forwards paying particular attention to high

trac areas. [11]

Bedømmelse

Mere om denne brugsanvisning

Vi forstår, at det er rart at have en papirbrugsanvisning til din Hoover SSNB1700 011 Damprenser. Du kan altid downloade brugsanvisningen fra vores hjemmeside og selv printe den. Hvis du gerne vil have en original brugsanvisning, anbefaler vi, at du kontakter Hoover. De kan muligvis levere en original brugsanvisning. Leder du efter brugsanvisningen til din Hoover SSNB1700 011 Damprenser på et andet sprog? Vælg dit foretrukne sprog på vores hjemmeside, og søg efter modelnummeret for at se, om vi har det tilgængeligt.

Specifikationer

Alle brugsanvisninger til Hoover Damprensere
Flere brugsanvisninger til Damprensere

Ofte stillede spørgsmål om Hoover SSNB1700 011 Damprenser

Vores support-team søger efter nyttige produktoplysninger og svar på ofte stillede spørgsmål. Hvis du finder urigtigheder i vores ofte stillede spørgsmål, må du meget gerne lade os det vide ved at bruge vores kontaktformular.

Relaterede produkter

Brugsanvisning

Hoover SCD1600 011 Damprenser

Brugsanvisning

Hoover SSW 1700 Damprenser

Brugsanvisning

Hoover CAN1700R 011 Damprenser

Brugsanvisning

Hoover SSNA1700 001 Damprenser

Brugsanvisning

Hoover SSNH1300 001 Damprenser

Brugsanvisning

Hoover SSN1700 011 Damprenser

Brugsanvisning

Hoover SSN1700 001 Steamjet Damprenser

Brugsanvisning

Hoover CA2IN1D 011 Damprenser

Relaterede kategorier