Home > Cykler & Scootere > Cykelpumper > Crivit Cykelpumper > Crivit IAN 79095 Cykelpumpe

Brugsanvisning Crivit IAN 79095 Cykelpumpe

Har du brug for en brugsanvisning til din Crivit IAN 79095 Cykelpumpe? Nedenfor kan du se og downloade PDF-brugsanvisningen gratis på Dansk. Dette produkt har i øjeblikket 1 ofte stillede spørgsmål, 0 kommentarer og har 0 stemmer. Hvis dette ikke er den brugsanvisning, du ønsker, bedes du kontakte os.

Er dit produkt defekt, uden at brugsanvisningen har en løsning på problemet? Tag til en Repair Café, og få gratis reparation.

Brugsanvisning

FLOOR PUMP

Instruction Manual

Intended use 5

Package contents 5

Technical data 5

Attention safety instructions 5

Initial use of the pump 5

Cleaning & care instructions 6

Disposal 6

Warranty/warranty terms 6

Distributor/service address 6

Congratulations!

With your purchase you have chosen a high-

quality product. Make yourself familiar with the

product before starting to use it. Carefully read the

following instruction manual. Use the product only

as described and only for the speciﬁed areas of

application. Keep this instruction manual for future

reference. When transferring this product to third

parties, also include all documents.

Intended use:

This Floor pump is suitable for inﬂating all

conventional bicycle tyres. Other uses or

modiﬁcations to the product are considered non-

intended usage and can lead to risk of injury and

damages. The distributor bears no liability for

damages resulting from non-intended usage. The

product is not intended for commercial use.

Package contents: (A1 / A2)

1 x ﬂoor pump

1 x metal adapter for balls,

2 x plastic adapters for air mattresses, inﬂatable

toys, etc.

Technical data:

Type: Floor Pump

Service Centre Nr: 26211 / IAN Nr. 79095

Nominal pressure: 6 bar / 87 PSI

Nominal excess pressure: 8 bar / 116 PSI

Displacement: 463 ml / 463 cm³

Pressure hose length: 64,5 cm

Production date: 2012 / E81059

Warranty: 3 years

Attention safety instructions!

tyre pressure (max. 8 bar / 116 PSI) or to the tyre

manufacturer’s indicated maximum tyre pressure.

This can usually be found on the tyre wall. The

indicated maximum values may not be exceeded

at any time.

Warning – Risk of injury through explosion if

maximum permitted pressure values are excee-

ded.

Defective or damaged air pumps may no longer

be used due to risk of injury. Defective Floor

pumps must be properly disposed of. Repairs are

not possible.

Caution – damaged pump, hose, adapter or

faulty connectors cause risk of explosion.

Due to the high operating force and the risks asso-

ciated with this, the product is not suited for use by

children or persons with physical and/or mental

disabilities. Please note that the pump plunger

and pump cylinder become very hot over longer

periods of pumping due to the friction between

them. For this reason, you should only grasp the

pump on the pump handle after pumping in order

to avoid burns.

Due to the risk of injury, a defective or damaged

Floor pump may never be used.

Warning! Some bicycle valves do not allow

pressure display.

For your own safety, please check the air pressure

with a calibrated manometer (i.e. at a fuel station).

Initial use of the pump: (B1 / B4)

(B1) Place the ﬂoor pump on a level and stable

surface.

(B2) There must be no kinks in the pump hose.

(B3) During pumping, please always position

yourself with both feet on the foot plate of the

ﬂoor pump to ensure it won’t fall over.

(B4) Operate the pump handle in a smooth and

even manner and not too quickly.

Adapter: (C1)

(1) E.g. balls

(2) E.g. air mattresses

(3) E.g. inﬂatable boats

(4) To inﬂate inner tubes with schrader valves

e.g. mountain bikes, trolleys and trailers.

(5) To inﬂate inner tubes with blitz valves,

e.g. city/trekking bicycles

(6) For inﬂating inner tubes with a presta valve,

gb ie

Bedømmelse

Fortæl os, hvad du synes om Crivit IAN 79095 Cykelpumpe ved at lave en produktbedømmelse. Vil du dele dine oplevelser med dette produkt eller stille et spørgsmål? Skriv en kommentar nederst på siden.

Er du tilfreds med Crivit IAN 79095 Cykelpumpe?
Ja Ingen

Vær den første til at bedømme dette produkt

0 stemmer

Deltag i samtalen om dette produkt

Her kan du dele, hvad du synes om Crivit IAN 79095 Cykelpumpe. Hvis du har et spørgsmål, skal du først læse brugsanvisningen omhyggeligt. Anmodning om en brugsanvisning kan ske ved at bruge vores kontaktformular.

Mere om denne brugsanvisning

Vi forstår, at det er rart at have en papirbrugsanvisning til din Crivit IAN 79095 Cykelpumpe. Du kan altid downloade brugsanvisningen fra vores hjemmeside og selv printe den. Hvis du gerne vil have en original brugsanvisning, anbefaler vi, at du kontakter Crivit. De kan muligvis levere en original brugsanvisning. Leder du efter brugsanvisningen til din Crivit IAN 79095 Cykelpumpe på et andet sprog? Vælg dit foretrukne sprog på vores hjemmeside, og søg efter modelnummeret for at se, om vi har det tilgængeligt.

Specifikationer

Mærke	Crivit
Model	IAN 79095
Kategori	Cykelpumper
Filtype	PDF
Filstørrelse	1.26 MB

Alle brugsanvisninger til Crivit Cykelpumper
Flere brugsanvisninger til Cykelpumper

Ofte stillede spørgsmål om Crivit IAN 79095 Cykelpumpe

Vores support-team søger efter nyttige produktoplysninger og svar på ofte stillede spørgsmål. Hvis du finder urigtigheder i vores ofte stillede spørgsmål, må du meget gerne lade os det vide ved at bruge vores kontaktformular.