Brugsanvisning AEG ZHC601X Emhætte

Brugsanvisning

2

www.zanussi.com

Recommendations

and suggestions

• The Instructions for Use apply

to several versions of this appli-

ance. Accordingly, you may nd

descriptions of individual features

that do not apply to your specic

appliance.

• The manufacturer will not be held

liable for any damages resulting

from incorrect or improper instal-

lation.

• The minimum safety distance

between the cooker top and the

extractor hood is 650 mm (some

models can be installed at a

lower height, please refer to the

paragraphs on working dimensions

and installation).

• Check that the mains voltage

corresponds to that indicated on

the rating plate xed to the inside

of the hood.

• For Class I appliances, check that

the domestic power supply guaran-

tees adequate earthing. Connect

the extractor to the exhaust ue

through a pipe of minimum diam-

eter 120 mm. The route of the

ue must be as short as possible.

• Do not connect the extractor hood

to exhaust ducts carrying combus-

tion fumes (boilers, replaces, etc.).

• If the extractor is used in conjunc-

tion with non-electrical appliances

(e.g. gas burning appliances),

a sufcient degree of aeration

must be guaranteed in the room

in order to prevent the backow

of exhaust gas. The kitchen must

have an opening communicating

directly with the open air in order

to guarantee the entry of clean air.

When the cooker hood is used

in conjunction with appliances

supplied with energy other than

electric, the negative pressure in

the room must not exceed 0,04

mbar to prevent fumes being

drawn back into the room by the

cooker hood.

• In the event of damage to the

power cable, it must be replaced

by the manufacturer or by the

technical service department, in

order to prevent any risks.

• If the instructions for installation

for the gas hob specify a greater

distance specied above, this has

to be taken into account. Regula-

tions concerning the discharge of

air have to be fullled.

• Use only screws and small parts

in support of the hood.

Warning: Failure to install the

screws or xing device in accord-

ance with these instructions may

result in electrical hazards.

• Connect the hood to the mains

through a two-pole switch having

a contact gap of at least 3 mm.

Use

• The extractor hood has been

designed exclusively for domestic

use to eliminate kitchen smells.

• Never use the hood for purposes

other than for which it has been

designed.

• Never leave high naked ames

under the hood when it is in op-

eration.

• Adjust the ame intensity to direct

it onto the bottom of the pan only,

EN

Bedømmelse

Mere om denne brugsanvisning

Vi forstår, at det er rart at have en papirbrugsanvisning til din AEG ZHC601X Emhætte. Du kan altid downloade brugsanvisningen fra vores hjemmeside og selv printe den. Hvis du gerne vil have en original brugsanvisning, anbefaler vi, at du kontakter AEG. De kan muligvis levere en original brugsanvisning. Leder du efter brugsanvisningen til din AEG ZHC601X Emhætte på et andet sprog? Vælg dit foretrukne sprog på vores hjemmeside, og søg efter modelnummeret for at se, om vi har det tilgængeligt.

Specifikationer

Alle brugsanvisninger til AEG Emhætter
Flere brugsanvisninger til Emhætter

Ofte stillede spørgsmål om AEG ZHC601X Emhætte

Vores support-team søger efter nyttige produktoplysninger og svar på ofte stillede spørgsmål. Hvis du finder urigtigheder i vores ofte stillede spørgsmål, må du meget gerne lade os det vide ved at bruge vores kontaktformular.

Relaterede produkter

Brugsanvisning

AEG AWH6400AM Emhætte

Brugsanvisning

AEG GD5960V Emhætte

Brugsanvisning

AEG X69453MV0 Emhætte

Brugsanvisning

AEG DBE5981HR Emhætte

Brugsanvisning

AEG DD9893-M Emhætte

Brugsanvisning

AEG DD9663-M Emhætte

Brugsanvisning

AEG X69453MV01 Emhætte

Brugsanvisning

AEG DK9190-M Emhætte

Relaterede kategorier