English (original instructions)
EN
DE ES IT FR PT NL RU FI SV NO DA PL CS SK SL HR HU RO BG EL AR TR HE LT LV ET
SPECIFICATIONS
Type 2400313
Voltage 60V DC
AIR volume 15.3 m³/min
Air speed 225 KM/H
Weight (Without
Battery)
3.75 kg
Battery Pack 2900413/2900513
Charger 2900313
Sound pressure
level
80dB(A), k:3.0dB(A)
Sound power level
98 dB(A)
Vibration level
<2,5m/s
2
, k=1.5m/s
2
DESCRIPTION
See Figure 1.
1. BLOWER TUBE
2. TRIGGER
3. CRUISE CONTROL LEVER
4. TURBO BUTTON
5. HARNESS
ASSEMBLY
UNPACKING
Carefully remove the product and any accessories
from the box.
Inspect the product carefully to make sure no
breakage or damage occurred during shipping.
Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
product.
If any parts are damaged or missing, please call your
Powerworks service centre for assistance.
PACKING LIST
See Figure 2.
60 V Backpack Blower Assembly
Blower Tube
Operator’s Manual
WARNING
Do not use this product if any parts on the Packing
List are already assembled to your product when you
unpack it. Parts on this list are not assembled to the
product by the manufacturer and require customer
installation. Use of a product that may have been
improperly assembled could result in serious personal
injury.
ASSEMBLING THE TIGGER HANDLE
See Figure 3.
WARNING
To prevent accidental starting that could cause serious
personal injury, always remove the batterypack from
the tool when assembling parts.
The flexible tube (B) is connected to the fan outlet
tube (A) from the manufacturer.
Slide trigger handle (D) on the upper blower tube (C).
Move trigger handle to desired location before fully
tightening. Use supplied screw (E) to tighten trigger
handle to the blower tube.
ASSEMBLING THE BLOWER TUBE See Figure 4.
Before tube installation, place the hose clamp (F)
around the flex tube. Clamp may need to be slightly
loosened for tube installation.
Insert the shorter end of the upper blower tube (C)
assembly into the flex tube (B) at a slight angle.
Use one end of the tube as a pivot point, and press
the other side into the flex tube. This may require
some force.
Stop pressing the upper blower tube when it connects
to the flex tube. Fully tighten the screws on the hose
clamps once assembled. Use a screw driver (not
provided) to loosen and tighten the hose clamp. Turn
clockwise to tighten, and counter clockwise to loosen.
Connect the blower tube (I) to the operating tube (C).
Twist clockwise until the tubes lock into position.
Place the cord (G) in the cord retainer (H).
TO INSTALL/REMOVE BATTERY PACK
See Figure 5.
IMPORTANT! The battery pack is not charged when it
place the battery pack in the battery charger and charge.
Make sure to read all safety precautions, and follow the
instructions in the Battery Charger manual.
TO INSTALL BATTERY PACK
Align the tongue of the battery pack with the cavity in
the backpack housing.
Insert the battery into the battery opening until the
battery release button (J) locks into place.
Grasp the backpack firmly.
Push the battery pack into the backpack until both
sides lock. The latch button will click when locked into
place.
Do not use force when inserting the battery pack. It
should slide into place and click.
1
Deltag i samtalen om dette produkt
Her kan du dele, hvad du synes om Powerworks PD60BPB Løvblæser. Hvis du har et spørgsmål, skal du først læse brugsanvisningen omhyggeligt. Anmodning om en brugsanvisning kan ske ved at bruge vores kontaktformular.