Brugsanvisning Maktec MT924 Planslibere

Brugsanvisning

3

ENGLISH (Original instructions)

Explanation of general view

1 Switch 2 Dust bag 3 Dust nozzle

SPECIFICATIONS

Model MT924

Paper size............................................................ 125 mm

Orbits per minute (min

–1

).......................................12,000

Dimensions (L x W x H) .... 153 mm x 123 mm x 144 mm

Net weight ..............................................................1.2 kg

Safety class ............................................................. /II

• Due to our continuing program of research and devel-

opment, the specifications herein are subject to change

without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

ENE052-1

Intended use

The tool is intended for the sanding of large surface of

wood, plastics and metal materials as well as painted

surfaces.

ENF002-2

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and can

only be operated on single-phase AC supply. They are

double-insulated and can, therefore, also be used from

sockets without earth wire.

GEA010-1

General Power Tool Safety Warnings

WARNING Read all safety warnings and all

instructions. Failure to follow the warnings and instruc-

tions may result in electric shock, fire and/or serious

injury.

Save all warnings and instructions for future refer-

ence.

GEB021-4

SANDER SAFETY WARNINGS

1. Always use safety glasses or goggles. Ordinary

eye or sun glasses are NOT safety glasses.

2. Hold the tool firmly.

3. Do not leave the tool running. Operate the tool

only when hand-held.

4. This tool has not been waterproofed, so do not

use water on the workpiece surface.

5. Ventilate your work area adequately when you

perform sanding operations.

6. Some material contains chemicals which may be

toxic. Take caution to prevent dust inhalation

and skin contact. Follow material supplier safety

data.

7. Use of this tool to sand some products, paints

and wood could expose user to dust containing

hazardous substances. Use appropriate respira-

tory protection.

8. Be sure that there are no cracks or breakage on

the pad before use. Cracks or breakage may

cause a personal injury.

SAVE THESE INSTRUCTIONS.

WARNING:

DO NOT let comfort or familiarity with product

(gained from repeated use) replace strict adherence

to safety rules for the subject product. MISUSE or

failure to follow the safety rules stated in this instruc-

tion manual may cause serious personal injury.

FUNCTIONAL DESCRIPTION

CAUTION:

• Always be sure that the tool is switched off and

unplugged before adjusting or checking function on the

tool.

Switch action (Fig. 1)

CAUTION:

• Before plugging in the tool, always be sure that the tool

is switched off.

To start the tool, press the “I (ON)” side of the switch. To

stop, press the “O (OFF)” side of the switch.

ASSEMBLY

CAUTION:

• Always be sure that the tool is switched off and

unplugged before carrying out any work on the tool.

Installing or removing abrasive disc (Fig. 2)

To install the abrasive disc, first remove all dirt or foreign

matter from the pad. Then peel off the backing paper

from the abrasive disc and attach the abrasive disc to the

pad. Be careful to align the holes in the abrasive disc with

those in the pad.

CAUTION:

• If you peel off the abrasive disc from the pad, its adhe-

sion will become poor. Never attempt to stick it onto the

pad for further use.

Installing dust bag (Fig. 3)

Install the dust bag on the tool so that the logo on the

dust bag will be upright (not upside down).

Emptying dust bag (Fig. 4)

When the dust bag is about half full, switch off and

unplug the tool. Remove the dust bag from the tool. Then

remove the dust nozzle from the dust bag after unlocking

the dust nozzle by turning it slightly counterclockwise.

Empty the dust bag by tapping it lightly.

After emptying the dust bag, install the dust nozzle on the

dust bag. Turn the dust nozzle slightly clockwise to lock it

in place. Then install the dust bag on the tool as

described in “Installing dust bag”.

Bedømmelse

Mere om denne brugsanvisning

Vi forstår, at det er rart at have en papirbrugsanvisning til din Maktec MT924 Planslibere. Du kan altid downloade brugsanvisningen fra vores hjemmeside og selv printe den. Hvis du gerne vil have en original brugsanvisning, anbefaler vi, at du kontakter Maktec. De kan muligvis levere en original brugsanvisning. Leder du efter brugsanvisningen til din Maktec MT924 Planslibere på et andet sprog? Vælg dit foretrukne sprog på vores hjemmeside, og søg efter modelnummeret for at se, om vi har det tilgængeligt.

Specifikationer

Alle brugsanvisninger til Maktec Planslibere
Flere brugsanvisninger til Planslibere

Ofte stillede spørgsmål om Maktec MT924 Planslibere

Vores support-team søger efter nyttige produktoplysninger og svar på ofte stillede spørgsmål. Hvis du finder urigtigheder i vores ofte stillede spørgsmål, må du meget gerne lade os det vide ved at bruge vores kontaktformular.

Relaterede produkter

Brugsanvisning

AEG FS 280 Planslibere

Brugsanvisning

FERM PSM1027 Planslibere

Brugsanvisning

Black and Decker KA170GT Planslibere

Brugsanvisning

Skil 7347 AA Planslibere

Brugsanvisning

Kress 6175 EA Planslibere

Brugsanvisning

Festool RO 90 DX FEQ Rotex Planslibere

Brugsanvisning

Bosch GSS 140-1 A Planslibere

Brugsanvisning

Parkside IAN 282491 Planslibere

Relaterede kategorier