Home > Have & Terrasse > Løvblæsere > Makita Løvblæsere > Makita UB1101 Løvblæser

Brugsanvisning Makita UB1101 Løvblæser

Har du brug for en brugsanvisning til din Makita UB1101 Løvblæser? Nedenfor kan du se og downloade PDF-brugsanvisningen gratis på Dansk. Dette produkt har i øjeblikket 0 ofte stillede spørgsmål, 0 kommentarer og har 0 stemmer. Hvis dette ikke er den brugsanvisning, du ønsker, bedes du kontakte os.

Er dit produkt defekt, uden at brugsanvisningen har en løsning på problemet? Tag til en Repair Café, og få gratis reparation.

Brugsanvisning

ENGLISH

Explanation of general view

1 Nozzle

2 Blower outlet

3 Suction inlet

4 Dust bag

5 Fastener

6 Switch trigger

7 Lock button

8 Speed control screw

9 Higher

10 Lower

11 Limit mark

12 Screwdriver

13 Brush holder cap

SPECIFICATIONS

Model UB1100 UB1101

Capacities

Air pressure (water column)..................................................................... 5.5 kPa 0 – 5.5 kPa

Max. air volume ....................................................................................... 2.8 m

/min. 0 – 2.8 m

/min.

No load speed (min

–1

)................................................................................ 16,000 0 – 16,000

Overall length ............................................................................................. 480 mm 480 mm

Net weight................................................................................................... 1.7 kg 1.7 kg

• Due to our continuing program of research and devel-

opment, the specifications herein are subject to change

without notice.

• Note: Specifications may differ from country to country.

Intended use

The tool is intended for blowing dust.

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and can

only be operated on single-phase AC supply. They are

double-insulated in accordance with European Standard

and can, therefore, also be used from sockets without

earth wire.

Safety hints

For your own safety, please refer to the enclosed safety

instructions.

ADDITIONAL SAFETY RULES

ENB017-1

1. Always use protective goggles, a cap and mask

when using the blower.

2. Never point the nozzle at anyone in the vicinity

when using the blower.

3. Always use the dust bag when collecting dust,

chips and the like.

4. Do not collect still smoldering cigarette ashes,

freshly cut metals shavings, screws, nails and

the like.

Warning – Electric shock could occur if used on

wet surfaces. Do not expose to rain. Store

indoors.

5. Never block suction inlet and/or blower outlet.

Increased motor revolution may cause danger-

ous fan breakage.

6. The blower is not intended for use by young chil-

dren or infirm persons without supervision.

7. Young children should be supervised to ensure

that they do not play with the blower.

SAVE THESE INSTRUCTIONS.

OPERATING INSTRUCTIONS

Blowing (Fig. 1)

For dust blowing, attach nozzle to blower outlet, turning

clockwise to lock it in place.

Dust suction (Fig. 2 & 3)

Note:

Dust bags are optional accessories in some countries.

For dust suction, fit nozzle onto suction inlet and dust bag

onto blower outlet.

After the bag fills with dust, empty the contents of the

dust bag into a dust bin by releasing the fastener.

Switch action

CAUTION:

Before plugging in the tool, always check to see that the

switch trigger actuates properly and returns to the “OFF”

position when released.

For UB1100 (Fig. 4)

To start the tool, simply pull the trigger. Release the trig-

ger to stop. For continuous operation, pull the trigger and

then push in the lock button. To stop the tool from the

locked position, pull the trigger fully, then release it.

For UB1101 (Fig. 5)

To start the tool, simply pull the trigger. Tool speed is

increased by increasing pressure on the trigger. Release

the trigger to stop. For continuous operation, pull the trig-

ger and then push in the lock button. To stop the tool from

the locked position, pull the trigger fully, then release it.

A speed control screw is provided so that maximum tool

speed can be limited (variable). Turn the speed control

screw clockwise for higher speed, and counterclockwise

for lower speed.

MAINTENANCE

CAUTION:

Always be sure that the tool is switched off and

unplugged before carrying out any work on the tool.

Replacement of carbon brushes (Fig. 6 & 7)

Replace carbon brushes when they are worn down to the

limit mark. Both identical carbon brushes should be

replaced at the same time.

To maintain product safety and reliability, repairs, mainte-

nance or adjustment should be carried out by a Makita

Authorized Service Center.

Bedømmelse

Fortæl os, hvad du synes om Makita UB1101 Løvblæser ved at lave en produktbedømmelse. Vil du dele dine oplevelser med dette produkt eller stille et spørgsmål? Skriv en kommentar nederst på siden.

Er du tilfreds med Makita UB1101 Løvblæser?
Ja Ingen

Vær den første til at bedømme dette produkt

0 stemmer

Deltag i samtalen om dette produkt

Her kan du dele, hvad du synes om Makita UB1101 Løvblæser. Hvis du har et spørgsmål, skal du først læse brugsanvisningen omhyggeligt. Anmodning om en brugsanvisning kan ske ved at bruge vores kontaktformular.

Mere om denne brugsanvisning

Vi forstår, at det er rart at have en papirbrugsanvisning til din Makita UB1101 Løvblæser. Du kan altid downloade brugsanvisningen fra vores hjemmeside og selv printe den. Hvis du gerne vil have en original brugsanvisning, anbefaler vi, at du kontakter Makita. De kan muligvis levere en original brugsanvisning. Leder du efter brugsanvisningen til din Makita UB1101 Løvblæser på et andet sprog? Vælg dit foretrukne sprog på vores hjemmeside, og søg efter modelnummeret for at se, om vi har det tilgængeligt.