Brugsanvisning Makita 6510LVR Bore-skruemaskine

Brugsanvisning

ENGLISH

Explanation of general view

1 Tighten

2 Sleeve

3 Ring

4 Low

5 High

6 Speed control screw

7 Switch trigger

8 Lock button

9 Reversing switch lever

SPECIFICATIONS

Model 6510LVR

Capacities

Steel ............................................................ 10 mm

Wood ........................................................... 18 mm

No load speed (RPM) ................................ 0 – 1,050

Overall length ............................................... 242 mm

Net weight ..................................................... 1.48 kg

•

Due to the continuing program of research and

development, the specifications herein are subject

to change without prior notice.

•

Note: Specifications may differ from country to

country.

Power supply

The machine should be connected only to a power

supply of the same voltage as indicated on the

nameplate, and can only be operated on single-phase

AC supply. They are double-insulated in accordance

with European Standard and can, therefore, also be

used from sockets without earth wire.

Safety hints

For your own safety, please refer to enclosed safety

instructions.

These symbols mean:

Read instruction manual.

DOUBLE INSULATION

ADDITIONAL SAFETY RULES

1. Always be sure you have a firm footing. Be

sure no one is below when using the machine

in high locations.

2. Hold the machine firmly.

3. Keep hands away from rotating parts.

4. When drilling into walls, floors or wherever

‘‘live’’electrical wires may be encountered, DO

NOT TOUCH ANY METAL PARTS OF THE

MACHINE! Hold the machine by the insulated

grasping surfaces to prevent electric shock if

you drill into a ‘‘live’’ wire.

5. Do not leave the machine running. Operate the

machine only when hand-held.

6. Do not touch the drill bit or the workpiece

immediately after operation; they may be

extremely hot and could burn your skin.

SAVE THESE INSTRUCTIONS.

OPERATING INSTRUCTIONS

Installing or removing drill bit (Fig. 1)

Important:

Always be sure that the machine is switched off and

unplugged before installing or removing the bit.

Hold the ring and turn the sleeve counterciockwise to

open the chuck jaws. Place the bit in the chuck as far

as it will go. Hold the ring firmly and turn the sleeve

clockwise to tighten the chuck. To remove the bit, hold

the ring and turn the sleeve counterclockwise.

Switch action (Fig. 2)

CAUTION:

Before plugging in the machine, always check to see

the switch trigger actuates properly and returns to the

‘‘OFF’’ position when released.

To start the machine, simply pull the trigger. Machine

speed is increased by increasing pressure on the

trigger. Release the trigger to stop. For continuous

operation, pull the trigger and then push in the lock

button. To stop the machine from the locked position,

pull the trigger fully, then release it. A speed control

screw is provided so that maximum machine speed

can be limited (variable). Turn the speed control

screw clockwise for higher speed, and counterclock-

wise for lower speed.

Reversing switch action (Fig. 3)

CAUTION:

•

Always check the direction of rotation before drilling.

•

Use the reversing switch only after the machine

comes to a complete stop. Changing the direction of

rotation before the machine stop may damage the

machine.

This machine has a reversing switch to change the

direction of rotation. Move the reversing switch lever

to the

position for clockwise rotation or

the

position for counterclockwise rotation.

6510lvr (Eng) (’96. 5. 15)

3

Bedømmelse

Mere om denne brugsanvisning

Vi forstår, at det er rart at have en papirbrugsanvisning til din Makita 6510LVR Bore-skruemaskine. Du kan altid downloade brugsanvisningen fra vores hjemmeside og selv printe den. Hvis du gerne vil have en original brugsanvisning, anbefaler vi, at du kontakter Makita. De kan muligvis levere en original brugsanvisning. Leder du efter brugsanvisningen til din Makita 6510LVR Bore-skruemaskine på et andet sprog? Vælg dit foretrukne sprog på vores hjemmeside, og søg efter modelnummeret for at se, om vi har det tilgængeligt.

Specifikationer

Alle brugsanvisninger til Makita Bore-skruemaskiner
Flere brugsanvisninger til Bore-skruemaskiner

Ofte stillede spørgsmål om Makita 6510LVR Bore-skruemaskine

Vores support-team søger efter nyttige produktoplysninger og svar på ofte stillede spørgsmål. Hvis du finder urigtigheder i vores ofte stillede spørgsmål, må du meget gerne lade os det vide ved at bruge vores kontaktformular.

Relaterede produkter

Brugsanvisning

Makita DDF446 Bore-skruemaskine

Brugsanvisning

Makita DHP459 Bore-skruemaskine

Brugsanvisning

Makita DS4011 Bore-skruemaskine

Brugsanvisning

Makita DP2010 Bore-skruemaskine

Brugsanvisning

Makita BDF446 Bore-skruemaskine

Brugsanvisning

Makita 8270D Bore-skruemaskine

Brugsanvisning

Makita DDF470 Bore-skruemaskine

Brugsanvisning

Makita DHP483 Bore-skruemaskine

Relaterede kategorier