Brugsanvisning FERM RSM1013 Bajonetsav

Brugsanvisning

62 Ferm

SPARE PARTS LIST

Nr. Description Position

408579 Adjustable bottom plate 2

408580 Rubber cover 6

408581 Bearing 11

408582 Bearing 12

408583 Shaft + gear 14+15

408584 Sliding bar + clamp 18+19

408585 Bearing 26

408586 Rotor 32

408587 Stator 35

408588 Brush holder 36

408589 Carbon brush (set) 37

408590 Speed controller 44

408591 Switch 46

RECIPROCATING SAW

THE NUMBERS IN THE FOLLOWING TEXT COR-

RESPOND WITH THE PICTURES AT PAGE 2

Table of contents

1. Machine data

2. Safety instructions

3. Operation

4. Maintenance

1. MACHINE DATA

TECHNICAL SPECIFICATIONS

PRODUCT INFORMATION

Fig.A

1. Blade

2. F ootplate

3. Blade clamp screw

4. Trigger switch

5. Speed controller

6. Trigger lock button

7. Mains lead

8. Footplate length adjustment screws

9. 4 mm hexagon key

2. SAFETY INSTRUCTIONS

The following pictograms are used in these instructions

for use:

There is danger of material damage or bodily

injury.

There is a chance of electric shock.

The tool meets the safety requirements stated in

the applicable European guidelines.

Class II equipment – Doubly insulated – An eart-

hed plug is not necessary

The revolutions of the machine can be electroni-

cally regulated.

Read the instructions.

Wear safety glasses.

Wear ear protection.

Faulty and/or discarded electrical or electronic

apparatus have to be collected at the appropriate

recycling locations.

Carefully read this manual before using the machine.

Make sure that you know how the machine functions and

how to operate it. Maintain the machine in accordance

with the instructions to make sure it functions properly.

Keep this manual and the enclosed documentation with

the machine.

When using electric machines always observe the

safety regulations applicable in your country to

reduce the risk of fire, electric shock and personal

injury. Read the following safety instructions and

also the enclosed safety instructions.

Keep these instructions in a safe place!

ADDITIONAL SAFETY INSTRUCTIONS

The machine must not be damp and must not be

operated in a wet environment. Always inspect

cable and plug before using machine. Only have

damage repaired by a qualified professional.

Only insert the plug into the mains socket when the

machine is switched off. Wear protective gloves and

sturdy footwear.

Do not saw materials containing asbestos!!!

• Wear protective goggles when working with mate-

rials which produce large amounts of chips.

• Wear a protective mask when sawing other fibrous

materials.

• Portable equipment used outdoors must be connec-

ted with a fault-current circuit breaker.

• Extension cables and plugs must be approved for

outdoors.

• Remove adjusting keys and wrenches before turning

the tool on.

• Secure your workpiece with clamps. Always lead

cable away from machine towards the rear.

• Move machine towards the workpiece only when

switched on.

• Always hold machine with both hands and ensure

that you have a safe footing while working.

• The machine may be operated only with the foot

plate mounted. When sawing, the foot plate must

always rest on the workpiece.

• Always remove the plug from the mains socket

before carrying out any work on the machine.

• Do not carry the machine by the cable.

Voltage | 230 V~

Frequency | 50 Hz

Power input | 800 W

No load speed | 600-2500/min

Maximum cutting thickness | 150 mm

Stroke length | 28 mm

Weight | 3.8 kg

Lpa (sound pressure level) | 90,2 dB(A)

Lwa (sound pressure capacity) | 103,2 dB(A)

Vibration value | 10,675 m/s

2

Ferm 3

Bedømmelse

Mere om denne brugsanvisning

Vi forstår, at det er rart at have en papirbrugsanvisning til din FERM RSM1013 Bajonetsav. Du kan altid downloade brugsanvisningen fra vores hjemmeside og selv printe den. Hvis du gerne vil have en original brugsanvisning, anbefaler vi, at du kontakter FERM. De kan muligvis levere en original brugsanvisning. Leder du efter brugsanvisningen til din FERM RSM1013 Bajonetsav på et andet sprog? Vælg dit foretrukne sprog på vores hjemmeside, og søg efter modelnummeret for at se, om vi har det tilgængeligt.

Specifikationer

Alle brugsanvisninger til FERM Bajonetsave
Flere brugsanvisninger til Bajonetsave

Ofte stillede spørgsmål om FERM RSM1013 Bajonetsav

Vores support-team søger efter nyttige produktoplysninger og svar på ofte stillede spørgsmål. Hvis du finder urigtigheder i vores ofte stillede spørgsmål, må du meget gerne lade os det vide ved at bruge vores kontaktformular.

Relaterede produkter

Brugsanvisning

FERM RCM1001 Bajonetsav

Brugsanvisning

FERM RSM1019 Bajonetsav

Brugsanvisning

FERM RCM1002 Bajonetsav

Brugsanvisning

FERM RSM1016 Bajonetsav

Brugsanvisning

FERM RSM1014 Bajonetsav

Brugsanvisning

FERM RSM1007 Bajonetsav

Brugsanvisning

FERM RSM1002 Bajonetsav

Brugsanvisning

FERM RSM1018 Bajonetsav

Relaterede kategorier