Brugsanvisning FERM HDM1023 Borehammer

Brugsanvisning

EN

4

with the mains power supply voltage?

• Are power cords, insulation and plug in

good order: sound, not loose or

damaged?

• Is there a good, firm connection at the

mains socket?

• Does the drill show any sign of abnormal

running, overheating or excessive

sparking?

• Whenever any of the problems mentioned

above appear, immediately cease using

the machine and have it repaired by an

expert.

• Wear ear protectors. Exposure to noise can

cause hearing loss.

• Use auxiliary handles supplied with the tool.

Loss of control can cause personal injury.

Hold power tool by insulated gripping surfaces,

when performing an operation where the cutting

accessory may contact hidden wiring or its own

cord. Cutting accessory contacting a “live” wire

may make exposed metal parts of the power tool

“live” and give the operator an electric shock.



When using electric machines always observe the

safety regulations applicable in your country to

reduce the risk of fire, electric shock and personal

injury. Read the following safety instructions and

also the enclosed safety instructions.

Always check that the mains voltage is

the same as on the type plate of the

machine.

Class II machine – Double insulation –

You don’t need any earthed plug.

Replacement of power cords or plugs

Immediately dispose of old cords and plugs once

they have been replaced. It is dangerous to plug a

loose power cord into a mains power socket.

Use of extension leads

Only ever use approved extension leads that are

suitable for the power rating of the machine. The

mini mum core thickness is 1.5 mm

2

. Whenever

using a reel extension lead, always fully unroll the

lead.

Immediately switch off the machine when:

• Excessive sparking of the carbon brushes and

verticiliosis in the collector.

• Interruption of the mains plug, mains lead or

mains lead damage.

• Defect switch

• Smoke or stench of scorched isolation



Hammer drills require very little operator

pressure. Excessive pressure on the tool

can lead to unnecessary overheating of

the motor, and burning of the driven tool.



The auxiliary handgrip can be rotated 360º around

the drill head, enabling safe and comfortable

operation, for both left and right-handed users:

• Loosen the handgrip by turning it

anticlockwise.

• Rotate the handgrip to the desire position.

• Retighten the handgrip in the new position.

Exchanging and removing drill bits

Fig. A+B

Before exchanging bits, first remove the

power plug from the wall socket.

Inspect bits regularly during use. Blunt

bits should be re-sharpened or replaced.

• Lightly oil the bit shaft before inserting it into

the chuck.

• Slide the locking sleeve (11) to the rear, and

insert the bit into the chuck opening. Ensure

that the keyway in the bit is seated properly in

the chuck, by carefully turning the bit until it

clicks into place. Release the locking sleeve.

• To remove the bit, slide and hold the locking

sleeve to the rear.



• Loosen the handgrip by turning it anticlockwise.

• Insert the depth gauge ruler through the hole

in the auxiliary handgrip.

• Slide the ruler to the desired depth.

• Retighten the screw firmly.



Fig. D

The correct position of the selection switch for

Bedømmelse

Mere om denne brugsanvisning

Vi forstår, at det er rart at have en papirbrugsanvisning til din FERM HDM1023 Borehammer. Du kan altid downloade brugsanvisningen fra vores hjemmeside og selv printe den. Hvis du gerne vil have en original brugsanvisning, anbefaler vi, at du kontakter FERM. De kan muligvis levere en original brugsanvisning. Leder du efter brugsanvisningen til din FERM HDM1023 Borehammer på et andet sprog? Vælg dit foretrukne sprog på vores hjemmeside, og søg efter modelnummeret for at se, om vi har det tilgængeligt.

Specifikationer

Alle brugsanvisninger til FERM Borehammere
Flere brugsanvisninger til Borehammere

Ofte stillede spørgsmål om FERM HDM1023 Borehammer

Vores support-team søger efter nyttige produktoplysninger og svar på ofte stillede spørgsmål. Hvis du finder urigtigheder i vores ofte stillede spørgsmål, må du meget gerne lade os det vide ved at bruge vores kontaktformular.

Relaterede produkter

Brugsanvisning

FERM HDM1014 Borehammer

Brugsanvisning

FERM HDM1017 Borehammer

Brugsanvisning

FERM HDM1021 Borehammer

Brugsanvisning

FERM HDM1003 Borehammer

Brugsanvisning

FERM HDM1015 Borehammer

Brugsanvisning

FERM HDM1033P Borehammer

Brugsanvisning

FERM HDM1001 Borehammer

Brugsanvisning

FERM CDM1094 Borehammer

Relaterede kategorier