Brugsanvisning Black and Decker VP321 VersaPak Håndstøvsuger

Brugsanvisning

3

Installation instructions (Fig. B & C)

B

Fix the charging base vertically to the wall using the

screws and plugs supplied, as illustrated,and within

reach of a power socket. Plug in and place the product

into position. The charging base can also be fixed, or

simply placed, in a convenient horizontal position.

C

Note: Avoid damaging the cable while fixing the base

to the wall by pushing the wire into the wire trap.

Recharging

From new, the rechargeable cells of the product need a

minimum charge time of 16 hours to ensure full power. We

suggest you fully discharge the product when it is used for the

first time as this will help the cells recharge faster. The switch

must be in the off position; the product will not charge if it

is in any other position. Whilst charging, the charger will get

warm; this is perfectly normal and safe, and your product can

remain on charge indefinitely without damage or danger. It is

not possible to “overcharge” the battery cells with the

charger provided.

Whilst recharging and discharging the VersaPak stick(s) will

become warm, this is perfectly normal and does not effect the

unit in any way.

VP321

A VersaPak stick will charge in either the left or right hand ports

(or both together if a second stick has been purchased). The

charging time is not affected and would still be 16 hours.

VP331

VersaPak sticks will only recharge when both are fitted into the

unit. If only one stick is inserted it will not charge.

How to use (Figs. D & E)

D

To start, slide the on/off switch forward (i.e. 0 = off, I = on).

To stop, slide the switch back.

Burst of power

Where applicable, your product has two power settings;

‘I’ for normal power and ‘MAX’ for a burst of additional

power to do tougher jobs, activated by sliding the switch

forward as far as it will go.

E

Always return the product to its charging base immediately

after use so that it will be ready and fully charged for the

next job. The switch must be in the off position; the

product will not charge if it is in any other position. Ensure

that the product is fully engaged on the charging base.

ENGLISH

Bedømmelse

Mere om denne brugsanvisning

Vi forstår, at det er rart at have en papirbrugsanvisning til din Black and Decker VP321 VersaPak Håndstøvsuger. Du kan altid downloade brugsanvisningen fra vores hjemmeside og selv printe den. Hvis du gerne vil have en original brugsanvisning, anbefaler vi, at du kontakter Black and Decker. De kan muligvis levere en original brugsanvisning. Leder du efter brugsanvisningen til din Black and Decker VP321 VersaPak Håndstøvsuger på et andet sprog? Vælg dit foretrukne sprog på vores hjemmeside, og søg efter modelnummeret for at se, om vi har det tilgængeligt.

Specifikationer

Alle brugsanvisninger til Black and Decker Håndstøvsugere
Flere brugsanvisninger til Håndstøvsugere

Ofte stillede spørgsmål om Black and Decker VP321 VersaPak Håndstøvsuger

Vores support-team søger efter nyttige produktoplysninger og svar på ofte stillede spørgsmål. Hvis du finder urigtigheder i vores ofte stillede spørgsmål, må du meget gerne lade os det vide ved at bruge vores kontaktformular.

Relaterede produkter

Brugsanvisning

Black and Decker V1250N Håndstøvsuger

Brugsanvisning

Black and Decker NV1999N Håndstøvsuger

Brugsanvisning

Black and Decker PV1820LRGP Håndstøvsuger

Brugsanvisning

Black and Decker DV1015EL Dustbuster Håndstøvsuger

Brugsanvisning

Black and Decker DV1810EL Håndstøvsuger

Brugsanvisning

Black and Decker CV7205 Håndstøvsuger

Brugsanvisning

Black and Decker CV9605T Håndstøvsuger

Brugsanvisning

Black and Decker NV4800FN Håndstøvsuger

Relaterede kategorier