Home > Gør-Det-Selv > Stiksave > Black and Decker Stiksave > Black and Decker KS501 Stiksav

Brugsanvisning Black and Decker KS501 Stiksav

Har du brug for en brugsanvisning til din Black and Decker KS501 Stiksav? Nedenfor kan du se og downloade PDF-brugsanvisningen gratis på Dansk. Dette produkt har i øjeblikket 4 ofte stillede spørgsmål, 0 kommentarer og har 0 stemmer. Hvis dette ikke er den brugsanvisning, du ønsker, bedes du kontakte os.

Er dit produkt defekt, uden at brugsanvisningen har en løsning på problemet? Tag til en Repair Café, og få gratis reparation.

Brugsanvisning

ENGLISH

(Original instructions)

operation. If damaged, have the power tool repaired

before use. Many accidents are caused by poorly

maintained power tools.

f. Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are less

likely to bind and are easier to control.

g. Use the power tool, accessories and tool bits etc.

in accordance with these instructions, taking into

account the working conditions and the work to be

performed. Use of the power tool for operations different

from those intended could result in a hazardous situation.

5. Service

a. Have your power tool serviced by a quali ed repair

person using only identical replacement parts. This will

ensure that the safety of the power tool is maintained.

Additional power tool safety warnings

Warning! Safety instructions for all saws

 Hold power tool by insulated gripping surfaces, when

performing an operation where the cutting accessory

may contact hidden wiring. Cutting accessory contacting

a "live" wire may make exposed metal parts of the power

tool "live" and could give the operator an electric shock.

 Use clamps or another practical way to secure and

support the workpiece to a stable platform. Holding

the work by hand or against your body leaves it unstable

and may lead to loss of control.

 Keep hands away from cutting area. Never reach

underneath the work piece any reason. Do not insert

 ngers or thumb into the vicinity of the reciprocating

blade and blade clamp. Do not stabilize the saw by

gripping the shoe.

 Keep blades sharp. Dull or damaged blades may cause

the saw to swerve or stall under pressure. Always use the

appropriate type of saw blade for the workpiece material

and type of cut.

 When cutting pipe or conduit, make sure that they

are free from water, electrical wiring, etc.

 Do not touch the workpiece or the blade immediately

after operating the tool. They can become very hot.

 Be aware of hidden hazards, before cutting into walls,

 oors or ceilings, check for the location of wiring and

pipes.

 The blade will continue to move after releasing the

switch. Always switch the tool off and wait for the saw

blade to come to a complete standstill before putting the

tool down.

Warning! Contact with, or inhalation of dusts arising from

cutting applications may endanger the health of the operator

and possible bystanders. Wear a dust mask speci cally

designed for protection against dust and fumes and ensure

that persons within or entering the work area are also

protected.

 The intended use is described in this instruction manual.

The use of any accessory or attachment or performance

of any operation with this tool other than those

recommended in this instruction manual may present a

risk of personal injury and/or damage to property.

Safety of others

 This tool is not intended for use by persons (including

children) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge,

unless they have been given supervision or instruction

concerning use of the appliance by a person responsible

for their safety.

 Children should be supervised to ensure that they do not

play with the appliance.

Vibration

The declared vibration emission values stated in the technical

data and the declaration of conformity have been measured

in accordance with a standard test method provided by

EN 60745 and may be used for comparing one tool with

another. The declared vibration emission value may also be

used in a preliminary assessment of exposure.

Warning! The vibration emission value during actual use of

the power tool can differ from the declared value depending

on the ways in which the tool is used. The vibration level may

increase above the level stated.

When assessing vibration exposure to determine safety

measures required by 2002/44/EC to protect persons regularly

using power tools in employment, an estimation of vibration

exposure should consider, the actual conditions of use and the

way the tool is used, including taking account of all parts of the

operating cycle such as the times when the tool is switched off

and when it is running idle in addition to the trigger time.

Labels on tool

The following symbols are shown on the tool:

Warning! To reduce the risk of injury, the user

must read the instruction manual.

Bedømmelse

Fortæl os, hvad du synes om Black and Decker KS501 Stiksav ved at lave en produktbedømmelse. Vil du dele dine oplevelser med dette produkt eller stille et spørgsmål? Skriv en kommentar nederst på siden.

Er du tilfreds med Black and Decker KS501 Stiksav?
Ja Ingen

Vær den første til at bedømme dette produkt

0 stemmer

Deltag i samtalen om dette produkt

Her kan du dele, hvad du synes om Black and Decker KS501 Stiksav. Hvis du har et spørgsmål, skal du først læse brugsanvisningen omhyggeligt. Anmodning om en brugsanvisning kan ske ved at bruge vores kontaktformular.

Mere om denne brugsanvisning

Vi forstår, at det er rart at have en papirbrugsanvisning til din Black and Decker KS501 Stiksav. Du kan altid downloade brugsanvisningen fra vores hjemmeside og selv printe den. Hvis du gerne vil have en original brugsanvisning, anbefaler vi, at du kontakter Black and Decker. De kan muligvis levere en original brugsanvisning. Leder du efter brugsanvisningen til din Black and Decker KS501 Stiksav på et andet sprog? Vælg dit foretrukne sprog på vores hjemmeside, og søg efter modelnummeret for at se, om vi har det tilgængeligt.

Specifikationer

Mærke	Black and Decker
Model	KS501
Kategori	Stiksave
Filtype	PDF
Filstørrelse	2.43 MB

Alle brugsanvisninger til Black and Decker Stiksave
Flere brugsanvisninger til Stiksave

Ofte stillede spørgsmål om Black and Decker KS501 Stiksav

Vores support-team søger efter nyttige produktoplysninger og svar på ofte stillede spørgsmål. Hvis du finder urigtigheder i vores ofte stillede spørgsmål, må du meget gerne lade os det vide ved at bruge vores kontaktformular.

Hvilke materialer kan jeg anvende min stiksav til? Verificeret

Da savklingerne kan skiftes ud, kan stiksave bruges til næsten ethvert materiale. Stiksave anvendes for det meste til at save rundinger og hjørner med.

Dette var nyttigt (442) Læs mere

Har jeg brug for øjenbeskyttelse, når jeg bruger et stiksav? Verificeret

Ja. Små partikler kan flyve op under savning. Når disse rammer et øje, kan de forårsage permanent øjenskade. Derfor er det altid nødvendigt at bære øjenbeskyttelse.

Dette var nyttigt (216) Læs mere

Kan jeg opbevare elværktøj i et skur eller garage? Verificeret

Generelt kan du opbevare elværktøj i et skur eller garage, selvom det nogle gange fryser der. Det er dog bedre for elværktøjets levetid at opbevare det på et tørt sted uden større temperaturudsving. I et skur eller garage kan temperaturforskelle medføre, at der dannes kondens, som kan give rust. Derudover holder værktøj, der kører på batterier, kortere og oplader ikke så godt ved meget lave temperaturer. For at være sikker på, hvordan dit elværktøj skal opbevares, skal du altid læse brugervejledningen grundigt.

Dette var nyttigt (64) Læs mere

Skal jeg have høreværn på, når jeg bruger en stiksav? Verificeret

Ja du burde. Selvom mængden af støj produceret af en stiksav kan variere mellem mærker og modeller, kan langvarig eksponering for høj støj forårsage permanent høreskade. Derfor er det en god idé at have høreværn på.

Dette var nyttigt (41) Læs mere