32
PLEASE READ AND SAVE THESE
IMPORTANT INSTRUCTIONS
When using electrical appliances, basic safety
precautions should always be taken including
the following:-
• Use the fan only for purposes described in
the instruction manual.
• To protect against electrical shock, do not
immerse the fan, plug or cord in water or
spray with liquids.
• Close supervision is necessary when any
appliance is used by or near children.
• Unplug from the electrical outlet when not in
use, when moving the fan from one location
to another, before putting on or taking off
parts and before cleaning.
• Avoid contact with any moving parts.
• DO NOT operate in the presence of explosive
and/or flammable fumes.
• DO NOT placethefanoranyparts nearan
openflame, cooking or other heating
appliance.
• DO NOT operate anyappliance with a
damaged cord, plug, after the appliance
malfunctions,or has beendropped/damaged in
any manner.
• The use of attachments not recommended
or sold by the appliance manufacturer may
cause hazards.
• DO NOT use outdoors.
• DO NOT let the cord hang over the edge of
a table or counter, or come into contact
with hot surfaces.
• To disconnect from the electrical supply,
grip the plug and pull from the wall outlet.
DO NOT pull on the cord.
• Always use on a dry, level surface.
• The fan should not be operated without its
column and base fitted.
• The fan should not be operated laying
on its side.
• This product is intended for household
use ONLY and not for commercial or
industrial applications.
• Keep cord out of heavy traffic areas and to
avoid fire hazard, never put the cord under
rugs or any heat source.
• Should the fan stop working, first check
the fuse in the plug (UK only) or
fuse/circuit breaker at the distribution
board is operating, before contacting
the manufacturer or service agent.
• If the supply cord or plug is damaged, it
must be replaced by the manufacturer or
its service agent or a similarly qualified
person in order to avoid hazard.
• Under the environment with electrical
fast transient, the product may malfunction
and require user to switch the unit off and
unplug in order for the product to operate
again.
• This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless
they have been given supervision or
instruction concerning use of the appliance
by a person responsible for their safety.
Children should be supervised to ensure
that they do not play with the appliance.
• WARNING: To reduce the risk of fire or
electric shock, DO NOT use this fan with any
solid-state speed control device
DESCRIPTIONS (See Fig. 1-8):
BT18 Control Panel-
A. Speed Control Buttons
B. Timer Control Knob
C. Oscillation Control Button
BT19 Control Panel-
D. Speed Indicator Lights
E. Power/Speed Button
F. Breeze/Sleep Mode Buttons
G. Breeze /Sleep Mode Indicator Lights
H. Oscillation Indicator Light
I. Oscillation Control Button
J. Timer Indicator Lights
K. Timer Control Button
Remote Control (Model BT19 only)
L. Power/Speed Button
M. Breeze/Sleep Mode Button
N. Timer Control Button
O. Oscillation Control Button
Base/Cord Assembly (for both BT18/BT19)
P. Fan housing
Q. Rear base
R. Front base
S. Thumb screws (2)
T. Power cord
U. Crosshead screws (2)
V. Cord clamp
MISSING A PART FOR YOUR FAN?
Please call 0800 052 3615 for assistance.
U.K. and IRELAND
ASSEMBLY INSTRUCTIONS
(See Fig. 7 & 8)
1. Assemble Base (Q,R) to Fan Housing (P)
making sure the cord is enclosed between
base (Q,R). Secure together with 2 Thumb
screws (S). Refer to Fig.7 for proper
alignment of assembled Base to
Fan Housing.
2. Secure Power Cord (T) to bottom of Base
(Q,R) using the Cord Clamp (V) with 2
crosshead screws (U). Refer to Fig.8.
OPERATING INSTRUCTIONS
(SeeFig. 2,4, 5,6)
BT18-
Toturnonunit(continuosuse):
1.Pluginunit
2.Turntimer (B)toI(ON)
3.SelectspeedsettingbuttonI(Low),II(Med),
III(High)(A).
To turn unit OFF:
Select Speed Button (A) (OFF) or turn
Timer (B) to (OFF)
To use Timer Control:
Select a Speed Button (A) I, II or III and turn
Timer (B) to desired time
(up to 120 minutes)
To use Oscillation Control:
Press (C) = Oscillation On, Off
BT19-
Remote Control:
Remote Control requires 2 AAA batteries for
operation. There is a slot on the back of the
unit (Refer to Fig. 6) to store the remote
when not in use.
To turn unit ON (continuosuse):
Press (E)- Select aspeed I (Low), II
(Med), III (High) shown by the Speed Indicator
lights (D). Ref. to Fig.4.
To turn unit OFF:
Press (E)
To use Timer Control:
Press (K) select desired time for Power to
turn OFF in 1, 2, 4, 8 hours shown bytheTimer
Indicatorlights (J). Ref. to Fig.4.
To use Oscillation Control:
Press (I) = Oscillation On, Off
To use Breeze/Sleep Modes:
Press (F) Select Natural Breeze or
Sleep Breeze shown by the Indicator lights (G).
• Natural Breeze Mode will randomly
cycle through the fan speed settings from
High, Medium, Low & OFF to simulate a
natural breeze until the user turns the
unit OFF.
• Sleep Breeze Mode will automatically
cycle through the fan speed settings,
starting at High for 3 hours, then Medium
for 2 hours, then on Low until user turns
the unit OFF.
CLEANING AND MAINTENANCE
• Always unplug the fan before cleaning
or assembly.
• Clean the fan with a soft cloth moistened
with a mild soap solution.
• DO NOT allow water to drip on or into the
fan motor housing.
• DO NOT open the unit for cleaning.
The manufacturer reserves the right to change
or modify any specifications without notice.
FITTING A REPLACEMENT PLUG FOR
U.K. AND IRELAND ONLY.
If the plug is not suitable for the socket outlets in
your home, it can be removed and replaced by
a plug of the correct type. For correct type and
correct installation please refer to "Installation
of a plug" below.
INSTALLATIONOFAPLUG–Applicableto
U.K.andIreland.
This product is fitted with a 13A plug complying
to BS1363. If this plug is unsuitable or needs to
be replaced, please note the following: The
wires in the mains lead are coloured as such:
BROWN-LIVE
BLUE-NEUTRAL
Deltag i samtalen om dette produkt
Her kan du dele, hvad du synes om Bionaire BT19 Ventilator. Hvis du har et spørgsmål, skal du først læse brugsanvisningen omhyggeligt. Anmodning om en brugsanvisning kan ske ved at bruge vores kontaktformular.