Brugsanvisning Auriol IAN 279421 Vægur

Brugsanvisning

-

3

-

• no foreign objects penetrate the housing.

• candles and other open flames must be kept away from this product at all times to

prevent the spread of fire

User

This device may be used by persons (including children over 8 years of age) with

reduced physical, sensory or mental abilities or lack of experience and knowledge, if

they are supervised or instructed regarding the safe use of the device and understand

the dangers that may arise. Children may not play with the device. Cleaning and user

maintenance of the device may not be performed by children without supervision. Keep

packaging films out of the hands of children. There is a danger of suffocation.

Batteries

Keep batteries out of reach of small children. If a battery is swallowed, you must seek

medical attention immediately. Batteries/rechargeable batteries must always be

inserted in the correct polarity. If necessary, clean the battery and device contacts.

Never attempt to recharge non-rechargeable batteries. Never short-circuit or attempt

to open batteries. Never throw batteries into fire as they may explode.

If the device will not be used for an extended time period, remove the battery and store

the device in a dry and dust-free area. Improper use of the battery can lead to

explosion or leakage.

If the battery leaks, avoid contact with skin, eyes and mucous membranes. Use gloves.

If you are exposed to battery acid, rinse the affected areas with plenty of clean water

and immediately seek medical attention. Remove discharged batteries from the device

as they present an increased risk of leakage.

Setup

Insert a 1,5 V AA R6/LR6 battery in the correct polarity into the battery compartment

on the back of the wall clock. The hands will move to the 12:00:00, 4:00:00 or

8:00:00 o'clock position and stop. The clock will now begin to receive the DCF77

radio signal. The reception process can take 3-10 minutes. After successful reception of

the radio signal, the hands will automatically move to the correct time. If the reception

process fails, it will be repeated hourly. The reception process can be restarted

manually by pressing and holding REC

RECREC

REC on the back side of the clock for 5 seconds. The

hands will move to the 12:00:00, 4:00:00 or 8:00:00 o'clock position and stop. The

clock will now begin to receive the DCF77 radio signal.

-

4

-

Manual time setting

This feature cannot be used while the clock is attempting to receive the radio signal

(Hands at 12:00:00, 4:00:00 or 8:00:00). Press and hold the SET button on the

backside of the clock for 5 seconds. The clock will enter manual mode. Press and hold

SET to move the hands to the correct position.

If the SET button is pressed briefly, the hands will move forward by exactly one minute.

After 7 seconds without pressing SET, the clock will exit manual mode and the hands

will move in the normal fashion.

Reset

In case of a malfunction, the clock can be reset and holding RESET

RESETRESET

RESET on the back side of

the clock for 5 seconds (with a small screwdriver).

The hands will move to the 12:00:00, 4:00:00 or 8:00:00 o'clock position and stop.

The clock will now begin to receive the DCF77 radio signal.

Reception interference

The DCF77 radio signal is transmitted from the vicinity of Frankfurt am Main and can

be received within a radius of about 1500 km. However, there are some sources of

interference that may greatly hinder reception.

If your wall clock does not correctly receive the radio signal, hang the wall clock in a

different location. Please note, that the electromagnetic waves that may occur near

computers, telephones, radios and TVs can interfere with DCF77 radio reception.

Strong building insulation (metal building elements), mountains or atmospheric

interference can also hinder reception. Replace the batteries if necessary.

Thermometer and Hygrometer

Your wall clock includes displays for temperature (TEMPERATURE) and humidity

(HUMIDITY). After unpacking your wall clock it may take some time before the sensors

have adjusted to their new environment.

Cleaning instructions

Clean the product with a soft, dry and lint-free cloth. A glasses cleaning cloth is ideal.

Notes on conformity

If used as intended this product conforms to the basic standards of § 3 and the other

relevant provisions of the FTEG (Section 3 of the R&TTE directive). The declaration of

conformity can be requested here: conformity@digi-tech-gmbh.com

Bedømmelse

Mere om denne brugsanvisning

Vi forstår, at det er rart at have en papirbrugsanvisning til din Auriol IAN 279421 Vægur. Du kan altid downloade brugsanvisningen fra vores hjemmeside og selv printe den. Hvis du gerne vil have en original brugsanvisning, anbefaler vi, at du kontakter Auriol. De kan muligvis levere en original brugsanvisning. Leder du efter brugsanvisningen til din Auriol IAN 279421 Vægur på et andet sprog? Vælg dit foretrukne sprog på vores hjemmeside, og søg efter modelnummeret for at se, om vi har det tilgængeligt.

Specifikationer

Alle brugsanvisninger til Auriol Vægure
Flere brugsanvisninger til Vægure

Ofte stillede spørgsmål om Auriol IAN 279421 Vægur

Vores support-team søger efter nyttige produktoplysninger og svar på ofte stillede spørgsmål. Hvis du finder urigtigheder i vores ofte stillede spørgsmål, må du meget gerne lade os det vide ved at bruge vores kontaktformular.

Relaterede produkter

Brugsanvisning

Auriol IAN 337035 Vægur

Brugsanvisning

Auriol IAN 297328 Vægur

Brugsanvisning

Auriol IAN 386311 Vægur

Brugsanvisning

Auriol IAN 386616 Vægur

Brugsanvisning

Auriol IAN 104007 Vægur

Brugsanvisning

Auriol IAN 277625 Vægur

Brugsanvisning

Auriol IAN 303355 Vægur

Brugsanvisning

Auriol IAN 114356 Vægur

Relaterede kategorier